| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ISO 1183 | |
Melt Volume Flow Rate(MVR) | | | |
260°C/2.16 kg |
*** cm³/10 min | ISO 1133 | |
Mold Shrinkage | | | |
Flow |
*** % | ISO 294-4 | 60x60x2; 120℃; 4 h |
Flow |
*** % | ISO 294-4 | 60x60x2; 250℃/WZ 80℃;600 bar |
Across Flow |
*** % | ISO 294-4 | 60x60x2; 120℃; 4 h |
Across Flow |
*** % | ISO 294-4 | 60x60x2; 250℃/WZ 80℃;600 bar |
Water Absorption |
*** %
| ISO 62 | Equilibrium, 23°C, 50% RH |
Water Absorption |
*** %
| ISO 62 | Saturation, 23°C |
Viscosity |
*** cm³/g
| ISO 1628 | |
Bulk(Apparent ) Density |
*** g/cm³
| ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ISO 527-1/-2 | 1mm/min |
Tensile Strength | | | |
Break |
*** Mpa | ISO 527-1/-2 | 5mm/min |
Tensile Elongation | | | |
Break |
*** % | ISO 527-1/-2 | 5mm/min |
Flexural Modulus |
*** Mpa
| ISO 178/1A | 2mm/min |
Flexural Strength | | | |
- |
*** Mpa | ISO 178/A | 2mm/min |
Flexural Strain | | | |
- |
*** % | ISO 178/A | 2mm/min |
Tensile Creep Modulus | | | |
1h |
*** Mpa | ISO 899-1 | |
1000h |
*** Mpa | ISO 899-1 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
-30℃ (-22℉) |
*** kJ/m² | ISO 179/1eA | |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | | | |
-30℃ (-22℉) |
*** kJ/m² | ISO 179/1eU | |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eU | |
Izod Notched Impact Strengh | | | |
-30℃ (-22℉) |
*** kJ/m² | ISO 180/1A | |
23℃ (73℉) |
*** kJ/m² | ISO 180/1A | |
Izod Unnotched Impact Strengh | | | |
-30℃ (-22℉) |
*** kJ/m² | ISO 180/1U | |
23℃ (73℉) |
*** kJ/m² | ISO 180/1U | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Ball Indentation Hardness |
*** Mpa
| ISO 2039-1 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
0.45 Mpa (66 psi)（4.6kg/cm²） |
*** °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75-1/-2 | |
Vicat Softening Temperature(VST) |
*** °C
| ISO 306 | 50 N; 120℃/h |
Relative Temperature Index(RTI), Imp | | | |
- |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | | | |
- |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Str | | | |
- |
*** °C | UL 746B | |
Coefficient of Linear Thermal Expansion | | | |
Flow |
*** E-6/K | ISO 11359-1/-2 | 23 to 55℃ |
Across Flow |
*** E-6/K | ISO 11359-1/-2 | 23 to 55℃ |
Melt Temperature(Tm) |
*** °C
| ISO 11357-1/-3 | 10℃/min |
Thermal Conductivity |
*** W/(m K)
| ISO 8302 | 23℃ |
Ball Pressure Test |
*** °C
| IEC 60695-10-2 | |
Processing Temperature |
*** °C
| - | Injection molding |
Mould temperature |
*** °C
| - | Injection molding |
Halving Interval | | | |
Tensile strength |
*** °C | IEC 60216 | |
Tensile impact strength |
*** °C | IEC 60216 | |
Electric strength |
*** °C | IEC 60216 | |
Temperature index (TI)-Tensile Strength | | | |
20000 h |
*** °C | IEC 60216 | |
Temperature index(TI)-Tensile impact strength) | | | |
20000 h |
*** °C | IEC 60216 | |
Temperature index(TI)-Electric strength | | | |
20000 h |
*** °C | IEC 60216 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
V-2 |
*** mm | UL94 | |
V-0 |
*** mm | UL94 | |
5VA |
*** mm | UL94 | |
Oxygen Index |
*** %
| ISO 4589 | Method A |
Glow Wire Flammability Index(GWFI) | | | |
0.75mm |
*** °C | IEC 60695-2-12 | |
1.5mm |
*** °C | IEC 60695-2-12 | |
3mm |
*** °C | IEC 60695-2-12 | |
Glow Wire Ignition Test(GWIT) | | | |
0.75mm |
*** °C | IEC 60695-2-13 | |
1.5mm |
*** °C | IEC 60695-2-13 | |
3.0mm |
*** °C | IEC 60695-2-13 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-m
| IEC 60093 | |
Surface Resistivity |
*** Ohm
| IEC 60093 | |
Dielectric Constant(Permittivity) | | | |
100Hz |
*** - | IEC 60250 | |
1MHz |
*** - | IEC 60250 | |
Dissipation Factor | | | |
100Hz |
*** E-4 | IEC 60250 | |
1MHz |
*** E-4 | IEC 60250 | |
Comparative Tracking Index (CTI) | | | |
Solution A |
*** V | IEC 60112 | |
Dielectric Strength |
*** kV/mm
| IEC 60243-1 | 1mm |
Electrolytical Corrosion |
*** -
| IEC 60426 | |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
