PA 6, non-reinforced, injection molding, weather stabilized
ISO Shortname: ISO 16396-PA 6,,GLR,S22-030
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Weather Resistance | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | |
Water Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry,1mm/min |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | cond. ,1mm/min |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | Dry,50mm/min |
Yield | *** Mpa | ISO 527-1/-2 | cond. ,50mm/min |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | Dry,50mm/min |
Yield | *** % | ISO 527-1/-2 | cond. ,50mm/min |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Dry,50mm/min |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | cond. ,50mm/min |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | 50 N; 50℃/h |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | 10℃/min |
Processing Temperature | *** °C | - | |
Mould temperature | *** °C | - |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
