PA 66, 35 % glass fibers, injection molding, heat-aging stabilized, high temperature stabilized
ISO Shortname: ISO 16396-PA 66,GF35,GHR,S14-110
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat StabilizedGood Heat AgingFilled & Reinforced | |||
| Processing | Injection | |||
| Reinforced | 35% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | 60x60x2; 120℃; 4 h |
Flow | *** % | ISO 294-4 | 60x60x2; 290℃/MT 80℃;600 bar |
Across Flow | *** % | ISO 294-4 | 60x60x2; 120℃; 4 h |
Across Flow | *** % | ISO 294-4 | 60x60x2; 290℃/MT 80℃;600 bar |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry,1mm/min |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | cond. ,1mm/min |
Tensile Strength | |||
Break | *** Mpa | ISO 527-1/-2 | Dry,5mm/min |
Break | *** Mpa | ISO 527-1/-2 | cond. ,5mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-1/-2 | Dry,5mm/min |
Break | *** % | ISO 527-1/-2 | cond. ,5mm/min |
Flexural Modulus | *** Mpa | ISO 178/A | Dry,2mm/min |
Flexural Modulus | *** Mpa | ISO 178/A | cond. ,2mm/min |
Flexural Strength | |||
- | *** Mpa | ISO 178/A | Dry,2mm/min |
- | *** Mpa | ISO 178/A | cond. ,2mm/min |
3.5% strain | *** Mpa | ISO 178/A | Dry,2mm/min |
3.5% strain | *** Mpa | ISO 178/A | cond. ,2mm/min |
Flexural Strain | |||
- | *** % | ISO 178/A | Dry,2mm/min |
- | *** % | ISO 178/A | cond. ,2mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | cond. |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | cond. |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | cond. |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | Dry |
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | cond. |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | Dry |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | cond. |
Izod Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 180/1U | Dry |
- | *** kJ/m² | ISO 180/1U | cond. |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1/-2 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/K | ISO 11359-1/-2 | 23 to 55℃ |
Across Flow | *** E-6/K | ISO 11359-1/-2 | 23 to 55℃ |
Melt Temperature(Tm) | *** °C | ISO 11357-1/-3 | 10℃/min |
Processing Temperature | *** °C | - | Injection molding |
Mould temperature | *** °C | - | Injection molding |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
