Ultramid B3WG7 BK00564 is a 35% glass fiber reinforced, pigmented black, injection molding PA6 grade for highly rigid, dimensionally stable components which are resistant to high temperature aging and have improved retention of properties in a hot water environment.
Applications
Typical applications include automotive clutch and accelerator pedals.
| Original Document | Technical Datasheet-ISO(English) | |||
| Resin ID | PA6-GF35 | |||
| Features | High Stiffness/RigidityGood Heat AgingDimensional StabilityHydrolysis ResistanceFilled & Reinforced | |||
| Applications | Automotive ClutchAccelerator Pedals | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateDynamic Shear modulus (G storage)-temperatureDynamic Shear modulus (G storage)-temperature (cond.)Stress-strain(Break)Stress-strain (Cond.)(Break)Secant modulus-strain(Break)Secant modulus-strain (Cond.)(Break)Stress-strain (isochronous)(Creep) 140°CCreep modulus-time 140°CTensile modulus-temperatureTensile modulus-temperature (cond.) | |||
| Reinforced | 35% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | 50% RH |
Water Absorption | *** % | ISO 62 | Saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | Dry,23℃ |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | Dry,23℃ |
Tensile Elongation | |||
Break | *** % | ISO 527 | Dry,23℃ |
Flexural Modulus | *** Mpa | ISO 178 | Dry,23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | Dry |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180 | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | Dry |
Melt Temperature(Tm) | *** °C | ISO 3146 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Conditioned |
Volume Resistivity | *** Ohm-m | IEC 60093 | Dry |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | IEC 60250 | Conditioned |
1MHz | *** - | IEC 60250 | Dry |
Dissipation Factor | |||
100Hz | *** E-4 | IEC 60250 | Conditioned |
100Hz | *** E-4 | IEC 60250 | Dry |
1MHz | *** E-4 | IEC 60250 | Conditioned |
1MHz | *** E-4 | IEC 60250 | Dry |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | Conditioned |
- | *** V | IEC 60112 | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
