Ultramid B3L BK00464 is an impact-modified, pigmented black, easy flowing injection molding PA6 grade for fast processing.
Applications
Typical applications include impact-resistant articles such as housings, fittings, small parts and anchors.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | High ImpactFast Cycle TimeHigh Flow | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Automotive Specs | FORD WSK-M4D578-AStellantis MS-DB-41 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Water Absorption | *** % | ISO 62 | 50% RH |
Water Absorption | *** % | ISO 62 | Saturation |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | Dry,23℃ |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | Dry,23℃ |
Tensile Elongation | |||
Yield | *** % | ISO 527 | Dry,23℃ |
Flexural Modulus | *** Mpa | ISO 178 | Dry,23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | Dry |
Izod Notched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 180 | Dry |
23℃ (73℉) | *** kJ/m² | ISO 180 | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | Dry |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | Dry |
Melt Temperature(Tm) | *** °C | ISO 3146 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 60093 | Conditioned |
Volume Resistivity | *** Ohm-m | IEC 60093 | Dry |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | IEC 60250 | Dry |
1MHz | *** - | IEC 60250 | Conditioned |
1MHz | *** - | IEC 60250 | Dry |
Dissipation Factor | |||
100Hz | *** E-4 | IEC 60250 | Dry |
1MHz | *** E-4 | IEC 60250 | Conditioned |
1MHz | *** E-4 | IEC 60250 | Dry |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | Conditioned |
- | *** V | IEC 60112 | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
