STYRON™ HIPS is a high clarity, high gloss polystyrene with excellent mechanical properties on thermoformed parts.
Main Characteristics:
High clarity
Excellent gloss
High heat
High flow
Easy processing
Excellent mechanical properties of thermoformed parts
Applications:
Transparent Packaging Applications: Form Fill Seal (FFS), pre-forms (DFS), Disposables and Bi-Oriented Polystyrene (BOPS).
Gloss cap-layer for extrusion
Complies with:
Europe REGULATION (EC) 10/2011
Meets Essential Req. of 94/62/EC(Packaging)
U.S. FDA 21 CFR 177.1640
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceHigh GlossEasy processingHigh Flow | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
200 ℃/5 Kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.20 mm,5.0 mm/min |
Tensile Modulus | *** Mpa | ISO 527-2/5 | 3.20 mm |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.20 mm,5.0 mm/min |
Yield | *** Mpa | ISO 527-2/5 | 3.20 mm |
Break | *** Mpa | ASTM D638 | 3.20 mm,5.0 mm/min |
Break | *** Mpa | ISO 527-2/5 | 3.20 mm |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.20 mm,5.0 mm/min |
Break | *** % | ISO 527-2 | 3.20 mm |
Flexural Modulus | *** Mpa | ASTM D790 | 1.3 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | 1.3 mm/min |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 1.3 mm/min |
- | *** Mpa | ISO 178 | 1.3 mm/min |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A120 |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Gloss | *** - | ASTM D 523 | 60°, Thermoformed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
