STYRON X-TECH™ 2175 is an environmental stress crack resistant (ESCR) HIPS resin especially developed for thermoforming and extrusion, especially for the refrigeration industry, the production of inner liners for fridges and freezers. Based on patented Trinseo technology, this resin allows potentially 5 % down gauging of the average sheet extrusion thickness for thermoforming of the inner liners, through its unique combination of ESCR, rigidity and melt strength.
Main Characteristics
Allows for downgauging
ESCR to food stuff and hydrocarbons
Ease of processing in extrusion and thermoforming
Excellent thermoforming behaviour
Increased rigidity
Applications
Large appliances / refrigeration liners
General extrusion/thermoforming applications requiring ESCR
Complies with
Europe Regulation (EC) 10/2011
FDA, 21 CFR 177.1640
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityESCRHigh melt strength | |||
| Processing | ExtrusionThermoforming | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
200 ℃/5 Kg | *** g/10 min | ISO 1133 | |
Bulk(Apparent ) Density | *** g/cm³ | ASTM D 1895 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 5.0 mm/min |
Tensile Modulus | *** Mpa | ISO 527-2/1 | |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 5.0 mm/min |
Yield | *** Mpa | ISO 527-2/5 | |
Break | *** Mpa | ASTM D638 | 5.0 mm/min |
Break | *** Mpa | ISO 527-2/5 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 5.0 mm/min |
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ASTM D790 | 1.3 mm/min |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 1.3 mm/min |
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A120 |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
