PULSE™ XT7215 is an easy flow, high-heat, low density mineral filled PC/ABS resin delivering optimized performance for automotive exterior component applications requiring low CLTE for a better dimensional stability.
Benefits
Very low CLTE for an improved dimensional stability (smaller gaps) and a better fit and finish for optimal quality
High ductility and easy flow for more design freedom (larger/longer parts, optimized wall thickness)and better economics (improved cycle time)
Significant density advantage (up to 10% compared to a PC/PET) for lighter parts and optimized costs
Faster cycle times for a better process cost control
High gloss for painted applications with enhanced paint adhesion
Applications
Roof Spoilers
Spoilers
Exterior trims
Roof bows
Roof rails
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat ResistanceHigh GlossGood PaintablilityHigh FlowFilled & Reinforced | |||
| Applications | Automotive Exterior TrimsSpoilerRoof bowsRoof Rails | |||
| Automotive Specs | BMW GS 93016Stellantis MS.50151Toyota TSM 5526G-2 | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
260°C/5.0 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | ISO 294-4 | |
Spiral Flow | *** mm | - | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/50 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2/50 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | -30 to 80°C |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volatile Organic Compounds | *** µg/g | VDA 277 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
