AjiENG.com
Sign in | Register

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.
Tel: +86 532 86871530
Email: info@ajieng.com

PULSE™ GX50

PC/ABS

TRINSEO

Product Description

PULSE™ GX50 is an easy flow, medium-heat, low gloss and low density PC/ABS resin delivering optimized performance for automotive interior component applications.

Benefits

  • Low gloss allowing paint-less visible applications

  • Low density driving to lighter and cost optimized parts

  • Easy flow, reduced scrap, and faster cycle times, while enabling thin wall part design for mass reduction

  • High-impact strength even at low temperature

  • Heat resistance optimized for the majority of automotive interior components

  • Consistent natural white color produces high quality part appearance when used with color concentrates (self coloring) or Trinseo Color Masterbatch Technology

  • Low odor & VOC to meet all global Automotive OEM specifications


Applications

  • Mid (floor)consoles

  • Lower Instrument Panel components

  • Door panel trim

  • Pillars

  • Storage / load floors / glove box

    General
    Original Document
    Technical Datasheet-ISO(English)
    Features
    High Impact
    High Impact at Low Temperatur
    Heat Resistance
    Low Gloss
    Fast Cycle Time
    Low Emission
    High Flow
    Applications
    Automotive Console Box
    Automotive Instrument Panel
    Car pillars
    Automotive Glove Box
    Automotive Consoles
    Storage Boxes
    Automotive Door panels
    Automotive Specs
    Audi TL 52231
    VAG(Volkswagen Group) TL 52231
    VOLVO STD 1212-86
    BMW GS 93016
    Mercedes-Benz DBL 5404.83
    GM(General Motors) GMW15581P-ABS+PC-T1
    GM(General Motors) GMW15581P-ABS+PC-T4
    HONDA HSM-C4-G (EU)
    PSA Peugeot-Citroen FTM 62 0008
    Tesla TM-1003 10/20
    Great Wall MP08-02
    JLR(Jaguar-Land Rover) STJLR.51.5262
    JLR(Jaguar-Land Rover) STJLR.51.353
    JLR(Jaguar-Land Rover) STJLR.51.5229
    Mercedes-Benz DBL 5404.05
    Daimler DBL 5404.83
    Stellantis MS.50174
    VOLVO STD 1212-86
    Specifications
    Physical Value/Unit(Sign in to View) Test Standard Test Condition

    Density/Specific Gravity

    		 *** g/cm³ ISO 1183

    Melt Mass Flow Rate(MFR)

    260°C/5.0 kg

    		*** g/10min ISO 1133

    Mold Shrinkage

    -

    		***~*** % ISO 294-4

    Spiral Flow

    		 *** mm -

    Bulk(Apparent ) Density

    		 *** g/cm³ ISO 60
    Mechanical Value/Unit(Sign in to View) Test Standard Test Condition

    Tensile Modulus

    		 *** Mpa ISO 527-2/1

    Tensile Strength

    Yield

    		*** Mpa ISO 527-2/50

    Tensile Elongation

    Break

    		*** % ISO 527-2/50
    Impact Value/Unit(Sign in to View) Test Standard Test Condition

    Charpy Notched Impact Strengh

    -30℃ (-22℉)

    		*** kJ/m² ISO 179/1eA

    23℃ (73℉)

    		*** kJ/m² ISO 179/1eA
    Thermal Value/Unit(Sign in to View) Test Standard Test Condition

    Heat Deflection Temperature(HDT)

    1.8 Mpa (264 psi)（18.6kg/cm²）

    		*** °C ISO 75-2/A
    Unannealed

    Vicat Softening Temperature(VST)

    		 *** °C ISO 306/B50

    Coefficient of Linear Thermal Expansion

    Flow

    		*** E-6 cm/cm/℃ ISO 11359-2
    Additional Information Value/Unit(Sign in to View) Test Standard Test Condition

    Volatile Organic Compounds

    		 *** µg/g VDA 277

    The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.