MAGNUM™ 8434 is a medium heat ABS. It is suitable for interior automotive applications requiring high gloss.
Benefits:
Lot to lot consistency allowing for optimal machine parameters settings from the start
Self-coloring enabling improvement of costs by using less pigments and lowering your logistic costs
Low VOC allowing a better interior air quality facing increasing regulatory and OEMs constraints.
Heat stability during wide range of processing temperatures: enhanced part design freedom
Applications:
Various interior trims
[TBD]
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat ResistanceHigh GlossLow Emission | |||
| Applications | Automotive Interior TrimsAutomotive Interior Parts | |||
| Automotive Specs | GM(General Motors) QK 002022 Color: NaturalFORD WSS-M4D827-A3Stellantis MS.50174 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
220°C/10.0 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ISO 294-4 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 3.20 mm,Injection Molded |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 3.20 mm,Injection Molded |
Yield | *** Mpa | ISO 527-2/50 | 3.20 mm,Injection Molded |
Tensile Elongation | |||
Yield | *** % | ISO 527 | 3.20 mm,Injection Molded |
Yield | *** % | ISO 527-2/50 | 3.20 mm,Injection Molded |
Flexural Modulus | *** Mpa | ISO 178 | 3.20 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 3.20 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Injection Molded |
-30℃ (-22℉) | *** kJ/m² | ISO 179/2C | Injection Molded |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Injection Molded |
23℃ (73℉) | *** kJ/m² | ISO 179/2C | Injection Molded |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180/A | Injection Molded |
23℃ (73℉) | *** kJ/m² | ISO 180/A | Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Annealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
Burning Rate | *** mm/min | ISO 3795 | 2 mm |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volatile Organic Compounds | *** µg/g | VDA 277 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
