MAGNUM™ 3416SC is the reference high-heat ABS in the automotive industry. It is universally suitable for all interior and exterior applications.
It is approved at all major OEMs. MAGNUM™ 3416SC is globally available, locally produced in major car production regions.
Benefits:
Lot to lot consistency allowing for optimal machine parameters settings from the start
Self-coloring enabling improvement of costs by using less pigments and lowering your logistic costs
Low VOC allowing a better interior air quality facing increasing regulatory and OEMs constraints.
Heat stability during wide range of processing temperatures: enhanced part design freedom
Applications:
Main interior and exterior automotive applications
Mid-consoles
Door panels
Door handles
Pillars
| Original Document | Technical Datasheet-ISO(English) | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Heat ResistanceLow Emission | |||
| Applications | Car pillarsAutomotive Door HandlesAutomotive ConsolesAutomotive Interior PartsAutomotive Exterior PartsAutomotive Door panels | |||
| Markets | Automotive | |||
| Processing | Injection | |||
| Automotive Specs | Audi TL 527 AAudi TL 527 BVAG(Volkswagen Group) TL 527 AVAG(Volkswagen Group) TL 527 BJLR(Jaguar-Land Rover) STJLR.51.353JLR(Jaguar-Land Rover) STJLR.51.5229BMW GS 93016 Color: NaturalFORD WSS-M4D690-B1GM(General Motors) GMW15572P-ABS-T2 Color: NaturalJLR(Jaguar-Land Rover) STJLR.51.5262 Color: NaturalPSA Peugeot-Citroen ABS-0019PSA Peugeot-Citroen ABS-0021Renault-Nissan(RNPO) AS32-1Mercedes-Benz DBL 5404.04FCA (Fiat Chrysler Automobiles) MS-DB 191-CPN1734FCA (Fiat Chrysler Automobiles) MS-DB 191-CPN3826FCA (Fiat Chrysler Automobiles) MS-DB 191-CPN2744FCA (Fiat Chrysler Automobiles) MS-DB 191-CPN3178Great Wall MP03-04HONDA HSM B3-GMahindra Yes: UnspecifiedMercedes-Benz DBL 5404.82Daimler DBL 5404.04Stellantis MS.50174TATA Yes: Unspecified | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ISO 294-4 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Yield | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
Burning Rate | *** mm/min | ISO 3795 | 2 mm |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Fogging | |||
- | *** % | ISO 6452 | |
Volatile Organic Compounds | *** µg/g | VDA 277 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
