MAGNUM™ 3404 Smooth is an excellent general purpose extrusion / thermoforming resin with outstanding processability. The mass (continuous process) ABS technology ensures an ABS resin that combines excellent processability with a stable light base colour that is ideal for self-colouring. The new MAGNUM 'Smooth Series' resins have an ultra low particulate content, which results in a superb surface finish that will enable our customers to produce parts with excellent aesthetics at a lower total cost.
Applications:
Transportation
Sanitary ware
Signage
Furnishings
Protective covers
Marine
Recreational vehicles
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good SurfaceEasy processing | |||
| Processing | ExtrusionThermoforming | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
220°C/10.0 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | 3.20 mm,Injection Molded |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/50 | 3.20 mm,Injection Molded |
Tensile Elongation | |||
Yield | *** % | ISO 527-2/50 | 3.20 mm,Injection Molded |
Flexural Modulus | *** Mpa | ISO 178 | 3.20 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 3.20 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Injection Molded |
-30℃ (-22℉) | *** kJ/m² | ISO 179/2C | Injection Molded |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Injection Molded |
23℃ (73℉) | *** kJ/m² | ISO 179 | Injection Molded |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | Injection Molded |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Annealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
Burning Rate | *** mm/min | ISO 3795 | 2 mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
