EMERGE™ PC/ABS 7770 advanced resin is a high flow, ignition-resistant PC/ABS blend that contains no chlorinated or brominated additives. It combines elevated heat performance with the excellent processing characteristics associated with other EMERGE™ PC/ABS Advanced resins, meeting the market trend in Flat TV housing for higher heat, higher flow materials.
Applications:
LCD TV Housings
Plasma TV Housings
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat ResistanceFlame RetardantCl- FreeBr- FreeHigh Flow | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ISO 1133 | |
260°C/5.0 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1 | 4.00 mm,Injection Molded |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/50 | 4.00 mm,Injection Molded |
Break | *** Mpa | ISO 527-2/50 | 4.00 mm,Injection Molded |
Tensile Elongation | |||
Yield | *** % | ISO 527-2/50 | 4.00 mm,Injection Molded |
Break | *** % | ISO 527-2/50 | 4.00 mm,Injection Molded |
Flexural Modulus | *** Mpa | ISO 178 | 4.00 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 4.00 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Injection Molded |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/A | Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A120 |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Ball Pressure Test | *** °C | IEC 60335-1 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | |||
1mm | *** °C | IEC 60695-2-12 | |
2mm | *** °C | IEC 60695-2-12 | |
3mm | *** °C | IEC 60695-2-12 | |
Glow Wire Ignition Test(GWIT) | |||
1.0mm | *** °C | IEC 60695-2-13 | |
2.0mm | *** °C | IEC 60695-2-13 | |
3.0mm | *** °C | IEC 60695-2-13 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
