EMERGE™ PC 8600 is a translucent, ignition-resistant and easy flow polycarbonate resin. This resin contains no bromine, chlorine or phosphate additives and is intended to comply with global environmental standards. It has a UL94 flammability rating of V-0 at 1.5mm.
Applications:
A broad range of injection molded applications in the electronics, electrical and information technology equipment markets.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Flame RetardantCl- FreeBr- FreeNon Red PhosphorusHigh Flow | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
300℃/1.2 kg | *** g/10min | ISO 1133 | |
Mold Shrinkage | |||
Flow | ***~*** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/50 | 4.00 mm,Injection Molded |
Break | *** Mpa | ISO 527-2/50 | 4.00 mm,Injection Molded |
Tensile Elongation | |||
Yield | *** % | ISO 527-2/50 | 4.00 mm,Injection Molded |
Break | *** % | ISO 527-2/50 | 4.00 mm,Injection Molded |
Flexural Modulus | *** Mpa | ISO 178 | 4.00 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 4.00 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | Injection Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ISO 2039-2 | 4.00 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | A120 |
Vicat Softening Temperature(VST) | *** °C | ISO 306/B50 | |
Relative Temperature Index(RTI), Imp | |||
- | *** °C | UL 746 | |
Relative Temperature Index(RTI), Elec | |||
- | *** °C | UL 746 | |
Relative Temperature Index(RTI), Str | |||
- | *** °C | UL 746 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | -40 to 82°C |
Ball Pressure Test | *** °C | IEC 60335-1 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
Oxygen Index | *** % | ISO 4589 | |
Glow Wire Ignition Test(GWIT) | |||
1.0mm | *** °C | IEC 60695-2-13 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
