EMERGE PC 4330ECO Advanced Polycarbonate Resin contains 50% post consumer recycled (PCR) polycarbonate with IEEE 1680:2006 certified by TÜV Rheinland. Its color under the code of IC8800234 meets the stringent requirement of white. This resin also provides a property balance of flowability, ductility, stiffness and thermal resistance to meet the market needs on various applications in information technology equipment (ITE) and consumer electronics without painting or coating.
Applications
Packaging for ITE
Electronic accessories
Electrical appliances
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Recycled Contained | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
300℃/1.2 kg | *** g/10min | ASTM D1238 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Post Consumer Recycled | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.20 mm,Injection Molded |
Flexural Modulus | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.20 mm,Injection Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 3.20 mm,Injection Molded |
Shore D hardness | *** D | ASTM D 2240 | 3.20 mm,Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
