EMERGE™ 4314 (former name XQR 70107.02) Advanced Resin is a 40% Glass Filled PC resin that is colored to either high reflective white or black color. It provides a property balance of high flowability, low dimensional distortion and high stiffness that can meet the market needs of thin wall application with high heat requirement.
Applications:
Handheld devices
Electronic accessories
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceDimensional StabilityHigh FlowFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlackWhite | |||
| Reinforced | 40% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
300℃/1.2 kg | *** g/10min | ASTM D1238 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Across Flow | ***~*** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.20 mm,Injection Molded |
Flexural Modulus | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.20 mm,Injection Molded |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
