EMERGE ABS 5302 is a black, 20% glass filled ABS which is suitable for use in a wide variety of internal structural component applications in the Information Technology market. This resin exhibits a property balance of flow, rigidity, and dimensional stability.
Applications:
Information Technology Equipment and consumer electronics
Printer internal components
Structural frames
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High Stiffness/RigidityDimensional StabilityHigh FlowFilled & Reinforced | |||
| Reinforced | 20% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
230°C/3.8 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
Across Flow | ***~*** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Break | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 3.20 mm,Injection Molded |
Break | *** % | ASTM D638 | 3.20 mm,Injection Molded |
Flexural Modulus | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.20 mm,Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | 3.20 mm,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 3.20 mm,Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate A (50°C/h), Loading 2 (50 N) |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | -30 to 29°C |
Across Flow | *** E-6 cm/cm/℃ | ASTM D 696 | -30 to 29°C |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | BK, NC, GY |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
