CELEX™ 310HF.M glass fiber reinforced polycarbonate resin is a 10% glass fiber reinforced polycarbonate material. It provides a property balance of easy flow, superior ignition resistance, high rigidity, dimension stability and heat resistance. It provides the injection molded part with good aesthetics. It does not contain Chlorine/or Bromine and phosphate type flame retardants. It is designed for a wide range of applications, e.g. computer enclosures, electronic accessories and electrical appliances.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceFlame RetardantCl- FreeBr- FreeGood SurfaceDimensional StabilityFilled & Reinforced | |||
| Additive | Flame Retardant | |||
| Reinforced | 10% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
300℃/1.2 kg | *** g/10min | ASTM D1238 | |
Mold Shrinkage | |||
Flow | ***~*** % | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 3.20 mm,Injection Molded |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 3.20 mm,Injection Molded |
Flexural Modulus | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | 3.20 mm,Injection Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 3.20 mm,Injection Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | 3.20 mm,Injection Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-1 | *** mm | UL94 | WT and RD |
V-0 | *** mm | UL94 | |
V-0 | *** mm | UL94 | BK and NC |
5VB | *** mm | UL94 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
