Ultraform N 2320 U017 UNC Q600 is a rapidly freezing UV stabilized general-purpose injection molding grade.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Fast Cycle TimeUV StabiltiyCopolymer | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | Injection | |||
| Automotive Specs | FORD WSS-M4D840-B1GM(General Motors) GMW22P.POM.C2UStellantis MS-DB-100 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Volume Flow Rate(MVR) | |||
190℃/2.16 kg | *** cm³/10min | ISO 1133 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | |
Across Flow | *** % | ISO 294-4 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | 23℃ |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | 23℃ |
Tensile Elongation | |||
Yield | *** % | ISO 527 | 23℃ |
Nominal Tensile Strain at Break | *** % | ISO 527 | 23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179 | |
23℃ (73℉) | *** kJ/m² | ISO 179 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
