Alcohol soluble polyamide for tough, abrasion-resistant coatings and coverings with high oxygen barrier.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Good ToughnessWear/Abrasion ResistanceAlcohol dissolvableHigh Barrier property/Low permeation | |||
| Compliance | REACH (EC 1907/2006)RoHS | |||
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Conditioned,23℃ |
Tensile Modulus | *** Mpa | ISO 527-1/-2 | Dry,23℃ |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-1/-2 | Conditioned,23℃ |
Yield | *** Mpa | ISO 527-1/-2 | Dry,23℃ |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | Conditioned,23℃ |
Yield | *** % | ISO 527-1/-2 | Dry,23℃ |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Conditioned,23℃ |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | Dry,23℃ |
Flexural Modulus | *** Mpa | ISO 178 | Conditioned,23℃ |
Flexural Modulus | *** Mpa | ISO 178 | Dry,23℃ |
Flexural Strength | |||
- | *** Mpa | ISO 178 | Conditioned,23℃ |
- | *** Mpa | ISO 178 | Dry,23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Conditioned |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry,23℃ |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Conditioned |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry,23℃ |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
