Veradel® 3300 SL30 is a polyethersulfone (PESU) compound designed to provide a balance of excellent mechanical properties, wear resistance and low coefficient of friction in both dry and externally lubricated applications. The resin is formulated with a ternary anti-friction/anti-wear additive system comprised of carbon fiber, graphite, and polytetrafluoroethylene (PTFE).
Veradel® PESU is produced to the highest industry standards and is characterized by a distinct combination of properties, which include excellent wear resistance, ease of melt processing, high purity, and excellent chemical resistance.
These properties make it well-suited for applications in transportation, electronics, chemical processing, and industrial uses. The resin is black in color in its natural state.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceWear/Abrasion ResistanceLow Friction/WearDimensional StabilityChemical Resistance | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | InjectionExtrusionProfile ExtrusionMachining | |||
| Reinforced | Carbon Fiber+Graphite+PTFECarbon FiberGraphitePTFE | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
380℃/2.16 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | |
Across Flow | *** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A/1 | |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2/1A/5 | |
Tensile Elongation | |||
Break | *** % | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
Shear Strength | *** Mpa | ASTM D 732 | |
Compressive Modulus | *** Mpa | ISO 604 | |
Compressive Strength | *** Mpa | ISO 604 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
- | *** kJ/m² | ISO 179 | |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ISO 2039-2 | |
Rockwell R | *** R | ISO 2039-2 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/kg/°C | DSC | 200°C |
Specific Heat | *** J/kg/°C | DSC | 50°C |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ISO 11359-2 | 0 to 180°C |
Glass Transition Temperature | *** °C | ASTM D 3418 | |
Thermal Conductivity | *** W/(m K) | ASTM E 1530 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
