Tribocomp® PA66 LGF30 PTFE15 MoS N9 is a 30% long glass fiber reinforced high-flow PA66 with a pellet length of 9mm and a PTFE/MoS2 package. It can easily be processed on most injection molding machines.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedWear/Abrasion ResistanceHigh FlowFilled & Reinforced | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Reinforced | 30% Long Glass Fiber15% PTFEMolybdenum(MOS2) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | Dry |
Water Absorption | *** % | ISO 62 | Equilibrium, 23°C, 50% RH |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2 | Conditioned,23℃ |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,120℃ |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,23℃ |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,90℃ |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | Conditioned,23℃ |
Yield | *** Mpa | ISO 527-2 | Dry,120℃ |
Yield | *** Mpa | ISO 527-2 | Dry,23℃ |
Yield | *** Mpa | ISO 527-2 | Dry,90℃ |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | Dry |
Flexural Modulus | *** Mpa | ISO 178 | Conditioned,23℃ |
Flexural Modulus | *** Mpa | ISO 178 | Dry,23℃ |
Flexural Strength | |||
- | *** Mpa | ISO 178 | Conditioned,23℃ |
- | *** Mpa | ISO 178 | Dry,23℃ |
Coefficient of Friction | *** - | ASTM D 3702 | Dry,Dynamic |
Coefficient of Friction | *** - | ASTM D 3702 | Dry,Static |
Wear Factor | *** - | ASTM D 3702 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | Dry |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/Bf | Dry,Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/Af | Dry,Unannealed |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 cm/cm/℃ | ISO 11359-2 | Dry |
Thermal Conductivity | *** W/(m K) | ISO 22007 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | *** Ohm | ASTM D257 | Dry |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | Dry |
Dielectric Strength | *** kV/mm | IEC 60243-1 | Dry,2.00mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
