Technyl® RED J 218HP V35 BLACK 21N is a a copolyamide 66/6T, reinforced with 35% glass fibre. Technyl® RED J offers outstanding long-term ageing performance up to 220°C (2000 hours) or 210°C (3000 hours).
Technyl® RED J has similar flow as standard PA66 and ensures a high chemical resistance and an excellent surface aspect.
In addition, Technyl® Red J is highly suitable for both vibration and hot gas welding, delivering high burst pressure levels confirmed in extensive pulsated air pressure tests at Solvay's Application Performance Testing (APT®) center. Recommended melt and mold temperatures are significantly lower than PA4.6 or PPA materials, this leads to energy savings during processing and minimizes part cooling time.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceHeat StabilizedGood Heat AgingGood SurfaceDimensional StabilityGood WeldChemical ResistanceHigh FlowFilled & Reinforced | |||
| Additive | Heat Stabilizer | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | Injection | |||
| Compliance | REACH (EC 1907/2006)RoHS | |||
| Reinforced | 35% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A | Dry,23℃ |
Tensile Strength | |||
Break | *** Mpa | ISO 527-2/1A | Dry,23℃ |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | Dry,23℃ |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | Dry |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/Af | Dry,Unannealed |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
