Ryton® R-7-150BL glass fiber and mineral filled polyphenylene sulfide compound provides enhanced mechanical strength after constant or repeated exposure to high temperature water.
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthChemical ResistanceFilled & Reinforced | |||
| Appearance | Pellets/GranulesBlack | |||
| Compliance | RoHS | |||
| Reinforced | Glass FiberMineralGlass Fiber+Minal | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
Flow | *** % | Internal | 3.20 mm |
Across Flow | *** % | Internal | 3.20 mm |
Water Absorption | *** % | ASTM D570 | 24 hr,23℃ |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-2 | |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
Compressive Strength | *** Mpa | ASTM D 695 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
Izod Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 180 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM E831 | -50 to 50℃ |
Flow | *** E-6 cm/cm/℃ | ASTM E831 | 100 to 200℃ |
Across Flow | *** E-6 cm/cm/℃ | ASTM E831 | -50 to 50℃ |
Across Flow | *** E-6 cm/cm/℃ | ASTM E831 | 100 to 200℃ |
Thermal Conductivity | *** W/(m K) | - | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
1 kHz | *** - | ASTM D 150 | 25℃ |
1MHz | *** - | ASTM D 150 | 25℃ |
Dissipation Factor | |||
1 kHz | *** E-4 | ASTM D 150 | 25℃ |
1MHz | *** E-4 | ASTM D150 | 25℃ |
Comparative Tracking Index (CTI) | |||
- | *** V | UL 746 | |
Dielectric Strength | *** kV/mm | ASTM D149 | |
Arc Resistance | *** sec | ASTM D495 | |
Insulation Resistance | *** Ohm | Internal | 90℃, 95%RH, 48 hr |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hydrolytic Stability | |||
Tensile Strength Retained | *** % | company | aged 1000 hours in water at 140°C |
Weight Gain | *** % | company | aged 1000 hours in water at 140°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
