| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ISO 1183 | |
Density/Specific Gravity |
*** g/cm³
| ASTM D792 | |
Density/Specific Gravity |
*** g/cm³
| ASTM D792 | |
Melt Volume Flow Rate(MVR) | | | |
300°C/1.2 kg |
*** cm³/10 min | ISO 1133 | |
300°C/2.16 kg |
*** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | | | |
300℃/1.2 kg |
*** g/10min | ASTM D1238 | |
Mold Shrinkage | | | |
Flow |
***~*** % | Internal | flow, 3.2 mm |
Water Absorption |
*** %
| ASTM D570 | 24 hours |
Water Absorption |
*** %
| ISO 62 | 23°C/sat |
Moisture /Humidity Absorption |
*** %
| ISO 62 | 23°C / 50% RH |
Specific Volume |
*** cm³/g
| ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus |
*** Mpa
| ASTM D638 | 5 mm/min |
Tensile Modulus |
*** Mpa
| ISO 527 | 1 mm/min |
Tensile Strength | | | |
Yield |
*** Mpa | ASTM D638 | Type I, 50 mm/min |
Yield |
*** Mpa | ISO 527 | 5 mm/min |
Yield |
*** Mpa | ISO 527 | 50 mm/min |
Break |
*** Mpa | ISO 527 | 50 mm/min |
Break |
*** Mpa | ASTM D638 | Type I, 50 mm/min |
Tensile Elongation | | | |
Yield |
*** % | ASTM D638 | Type I, 50 mm/min |
Yield |
*** % | ISO 527 | 50 mm/min |
Break |
*** % | ASTM D638 | Type I, 50 mm/min |
Break |
*** % | ISO 527 | 50 mm/min |
Flexural Modulus |
*** Mpa
| ASTM D790 | 1.3 mm/min, 50 mm span |
Flexural Modulus |
*** Mpa
| ISO 178 | 2 mm/min |
Flexural Strength | | | |
Yield |
*** Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
Yield |
*** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | | | |
23℃ (73℉) |
*** kJ/m² | ISO 179/1eA | V-notch Edgew 80*10*4 sp=62mm |
Izod Notched Impact Strengh | | | |
-30℃ (-22℉) |
*** J/m | ASTM D256 | |
-30℃ (-22℉) |
*** kJ/m² | ISO 180/1A | 80*10*4 |
23℃ (73℉) |
*** J/m | ASTM D256 | |
23℃ (73℉) |
*** kJ/m² | ISO 180/1A | 80*10*4 |
Izod Unnotched Impact Strengh | | | |
23℃ (73℉) |
*** J/m | ASTM D4812 | |
Instrumented Impact Energy | | | |
23℃ (73℉)Total Energy |
*** J | ASTM D3763 | |
Falling Dart Impact |
*** J
| ASTM D 3029 | |
Tensile Impact |
*** kJ/m²
| ASTM D 1822 | Type S |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M |
*** M
| ASTM D 785 | |
Rockwell R |
*** R
| ASTM D785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | 3.2mm, unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75/Af | Flatw 80*10*4 sp=64mm |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | Rate B/50 |
Vicat Softening Temperature(VST) |
*** °C
| ISO 306 | Rate B/120 |
Vicat Softening Temperature(VST) |
*** °C
| ISO 306 | Rate B/50 |
Relative Temperature Index(RTI), Imp | | | |
- |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | | | |
- |
*** °C | UL 746B | |
Relative Temperature Index(RTI), Str | | | |
- |
*** °C | UL 746B | |
Specific Heat |
*** J/g-°C
| ASTM C 351 | |
Coefficient of Linear Thermal Expansion | | | |
Flow |
*** E-6/°C | ASTM E831 | -40°C to 40°C, flow |
Flow |
*** E-6/°C | ASTM E831 | -40°C to 95°C, flow |
Flow |
*** E-6/°C | ISO 11359-2 | -40°C to 40°C, flow |
Across Flow |
*** E-6/°C | ASTM E831 | -40°C to 40°C, xflow |
Across Flow |
*** E-6/°C | ISO 11359-2 | -40°C to 40°C, xflow |
Thermal Conductivity |
*** W/m-°C
| ASTM C 177 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
V-2 |
*** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity |
*** Ohm-cm
| ASTM D257 | |
Dielectric Constant(Permittivity) | | | |
50/60 Hz |
*** - | ASTM D150 | |
1MHz |
*** - | ASTM D 150 | |
Dissipation Factor | | | |
50/60 Hz |
*** E-4 | ASTM D 150 | |
100Hz |
*** E-4 | ASTM D 150 | |
Comparative Tracking Index (CTI) | | | |
- |
*** PLC | UL 746A | |
Dielectric Strength |
*** kV/mm
| ASTM D149 | in air, 3.2 mm |
High Voltage Arc Tracking Rate(HVTR) |
*** PLC
| UL 746A | |
Hot Wire Ignition(HWI) |
*** PLC
| UL 746A | |
High Ampere Arc Ignition(HAI) |
*** PLC
| UL 746A | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission |
*** %
| ASTM D1003 | 2.54 mm |
Haze |
*** %
| ASTM D1003 | 2.54 mm |
Refractive Index |
*** -
| ASTM D542 | |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
