Radel® R-5600 is a very high melt flow grade of Radel® polyphenylsulfone (PPSU). It is especially well-suited for parts requiring long flow length with thin walls. Radel® resins offer exceptional hydrolytic stability and toughness superior to other commercially-available, high-temperature engineering resins. They also offer high deflection temperatures and outstanding resistance to environmental stress cracking. Radel® polymers are inherently flame retardant, provide excellent thermal stability and possess good electrical properties.
Additonal Radel® grades include a transparent injection molding grade (R-5000), an opaque, general purpose, injection molding grade (R-5100) and a transparent, extrusion grade (R-5500).
Natural/Transparent: Radel® R-5600 NT
Additional Made-to-Order Colors Available
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessHeat ResistanceHeat StabilizedFlame RetardantSteam ResistantESCRChemical ResistanceHydrolysis ResistanceAcid ResistancAlkali resistance | |||
| Appearance | Pellets/GranulesClear/TransparentOpaque Color | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
365°C/5.0 kg | ***~*** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 3.18 mm |
Water Absorption | *** % | ASTM D570 | 24 hr |
Water Absorption | *** % | ASTM D570 | Equilibrium |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.18 mm |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 3.18 mm |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 3.18 mm |
Break | ***~*** % | ASTM D638 | 3.18 mm |
Flexural Modulus | *** Mpa | ASTM D790 | 3.18 mm |
Flexural Strength | |||
5% strain | *** Mpa | ASTM D 790 | 3.18 mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | 3.18 mm |
Tensile Impact | *** kJ/m² | ASTM D 1822 | 3.18 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed,3.18 mm |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | 3.18 mm |
Glass Transition Temperature | *** °C | ASTM E 1356 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 3.18 mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 0.0254 mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 3.18 mm |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Refractive Index | *** - | ASTM D542 | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Steam Sterilization | *** Cycles | - | w/ Morpholine |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
