Radel® R-5500 is a general purpose extrusion grade of polyphenylsulfone (PPSU), offering exceptional hydrolytic stability and better toughness than most commercially available high-temperature polymers. This resin has a high heat deflection temperature, excellent thermal stability, outstanding resistance to environmental stress cracking, good electrical properties and inherent flame retardant properties. Transparent and opaque colors are available.
Transparent Grades:
Natural: Radel® R-5500 NT
Opaque Grades:
Black: Radel® R-5500 BK937
Bone: Radel® R-5500 NT15
Grey: Radel® R-5500 GY1137
Grey: Radel® R-5500 GY1037
Grey: Radel® R-5500 GY874
Red: Radel® R-5500 RD1018
Orange: Radel® R-5500 OR1145
Yellow: Radel® R-5500 YL1337
Green: Radel® R-5500 GN1007
Blue: Radel® R-5500 BU1027
Blue: Radel® R-5500 BU391
Violet: Radel® R-5500 VT2582
Brown: Radel® R-5500 BN1164
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessHeat ResistanceHeat StabilizedFlame RetardantIR transmittanceBiocompatibleE-beam SterilizableGamma ResistanceEtO sterilizableSteam ResistantESCRChemical ResistanceHydrolysis ResistanceAcid ResistancAlkali resistance | |||
| Appearance | Pellets/GranulesClear/TransparentBlackGray ColorBrownYellow | |||
| Processing | InjectionExtrusionSheet ExtrusionProfile ExtrusionFilm ExtrusionThermoformingMachining | |||
| Compliance | ISO10993RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
365°C/5.0 kg | ***~*** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 3.18 mm |
Water Absorption | *** % | ASTM D570 | 24 hr |
Water Absorption | *** % | ASTM D570 | Equilibrium |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.18 mm |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 3.18 mm |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 3.18 mm |
Break | ***~*** % | ASTM D638 | 3.18 mm |
Flexural Modulus | *** Mpa | ASTM D790 | 3.18 mm |
Flexural Strength | |||
5% strain | *** Mpa | ASTM D 790 | 3.18 mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | 3.18 mm |
Tensile Impact | *** kJ/m² | ASTM D 1822 | 3.18 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed,3.18 mm |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | 3.18 mm |
Glass Transition Temperature | *** °C | ASTM E 1356 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 3.18 mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 0.0254 mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 3.18 mm |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Refractive Index | *** - | ASTM D542 | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Steam Sterilization | *** Cycles | - | w/ Morpholine |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
