Radel® R-5100 is an opaque, general purpose polyphenylsulfone (PPSU) for injection molding, that offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offers a high deflection temperature and outstanding resistance to environmental stress cracking. Radel® polymers are inherently flame retardant, provide excellent thermal stability and possess good electrical properties.
Black: Radel® R-5100 BK937
Bone: Radel® R-5100 NT15
Grey: Radel® R-5100 GY1137
Grey: Radel® R-5100 GY1037
Grey: Radel® R-5100 GY874
Red: Radel® R-5100 RD1018
Orange: Radel® R-5100 OR1145
Yellow: Radel® R-5100 YL1337
Green: Radel® R-5100 GN1007
Blue: Radel® R-5100 BU1027
Violet: Radel® R-5100 VT2582
Brown: Radel® R-5100 BN1164
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessHeat ResistanceHeat StabilizedFlame RetardantBiocompatibleE-beam SterilizableGamma ResistanceEtO sterilizableSteam ResistantESCRChemical ResistanceHydrolysis ResistanceAcid ResistancAlkali resistance | |||
| Appearance | Pellets/GranulesBlackGray ColorBrownGreenYellow | |||
| Processing | InjectionExtrusionSheet ExtrusionProfile ExtrusionFilm ExtrusionThermoformingMachining | |||
| Compliance | FAA FARISO10993NSFRoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
365°C/5.0 kg | ***~*** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Break | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | |
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
Yield | *** Mpa | ASTM D790 | |
Poisson Ratio | *** - | ASTM E 132 | |
Shear Strength | *** Mpa | ASTM D 732 | |
Compressive Modulus | *** Mpa | ASTM D 695 | |
Compressive Strength | *** Mpa | ASTM D 695 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
Izod Unnotched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
Tensile Impact | *** kJ/m² | ASTM D 1822 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed,3.18 mm |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | |
Glass Transition Temperature | *** °C | ASTM E 1356 | |
Thermal Conductivity | *** W/(m K) | ASTM C 177 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | ALL colors |
Oxygen Index | *** % | ASTM D 2863 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | |
1 kHz | *** - | ASTM D 150 | |
Dielectric Strength | *** kV/mm | ASTM D149 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Refractive Index | *** - | ASTM D542 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
