Radel® R-5000 is a transparent polyphenylsulfone (PPSU) which offers exceptional hydrolytic stability, and toughness superior to other commercially-available, high-temperature engineering resins. This resin also offer high deflection temperatures and outstanding resistance to environmental stress cracking. Radel® polymers are inherently flame retardant, provide excellent thermal stability and possess good electrical properties.
Smoke: Radel® R-5000 CL 301
Amber: Radel® R-5000 NT
Blue: Radel® R-5000 TR BU391
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessHeat ResistanceHeat StabilizedGood Heat AgingFlame RetardantDimensional StabilityBiocompatibleE-beam SterilizableGamma ResistanceEtO sterilizableSteam ResistantESCRChemical ResistanceHydrolysis ResistanceAcid ResistancAlkali resistanceDetergent resistant | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | InjectionExtrusionSheet ExtrusionProfile ExtrusionThermoformingMachining | |||
| Compliance | FAA FARISO10993NSFRoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
365°C/5.0 kg | ***~*** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 3.18 mm |
Water Absorption | *** % | ASTM D570 | 24 hr |
Water Absorption | *** % | ASTM D570 | Equilibrium |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | 3.18 mm |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | 3.18 mm |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 3.18 mm |
Break | ***~*** % | ASTM D638 | 3.18 mm |
Flexural Modulus | *** Mpa | ASTM D790 | 3.18 mm |
Flexural Strength | |||
5% strain | *** Mpa | ASTM D 790 | 3.18 mm |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | 3.18 mm |
Tensile Impact | *** kJ/m² | ASTM D 1822 | 3.18 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed,3.18 mm |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM D 696 | 3.18 mm |
Glass Transition Temperature | *** °C | ASTM E 1356 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | 3.18 mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 0.0254 mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 3.18 mm |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Refractive Index | *** - | ASTM D542 | |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Steam Sterilization | *** Cycles | - | w/ Morpholine |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
