Amodel® ET-1000 HS is an impact modified, heat stabilized polyphthalamide (PPA) that exhibits exceptional impact strength and toughness. Like all Amodel® PPA resins, ET-1000 HS offers high fatigue strength, good chemical resistance and high mechanical property retention over a broad temperature and humidity range.
Natural: ET-1000 HS NT
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactGood ToughnessHeat StabilizedLow WarpageChemical Resistance | |||
| Additive | Impact ModifierHeat Stabilizer | |||
| Appearance | Natural Color | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | Dry |
Across Flow | *** % | ASTM D955 | Dry |
Water Absorption | *** % | ASTM D570 | 24 hr |
Abrasion resistance | *** mg | ASTM D 1044 | Dry,1000 Cycles, 1000 g, CS-17 Wheel |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | Conditioned |
Tensile Modulus | *** Mpa | ASTM D638 | Dry |
Tensile Modulus | *** Mpa | ASTM D638 | Dry |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,100℃ |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,23℃ |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | Dry,100℃ |
Yield | *** Mpa | ISO 527-2 | Dry,23℃ |
Break | *** Mpa | ISO 527-2 | Dry,23℃ |
- | *** Mpa | ASTM D 638 | Conditioned,-40℃ |
- | *** Mpa | ASTM D 638 | Conditioned,23℃ |
- | *** Mpa | ASTM D 638 | Dry,-40℃ |
- | *** Mpa | ASTM D 638 | Dry,23℃ |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | Conditioned,-40℃ |
Yield | *** % | ASTM D638 | Conditioned,23℃ |
Yield | *** % | ASTM D638 | Dry,-40℃ |
Yield | *** % | ASTM D638 | Dry,23℃ |
Yield | *** % | ISO 527-2 | Dry,100℃ |
Yield | *** % | ISO 527-2 | Dry,23℃ |
Break | *** % | ASTM D638 | Dry,-40℃ |
Break | *** % | ASTM D638 | Dry,23℃ |
Break | *** % | ISO 527-2 | Conditioned,-40℃ |
Break | *** % | ISO 527-2 | Conditioned,23℃ |
Break | *** % | ISO 527-2 | Dry,100℃ |
Break | *** % | ISO 527-2 | Dry,23℃ |
Flexural Modulus | *** Mpa | ASTM D790 | Conditioned |
Flexural Modulus | *** Mpa | ISO 178 | Dry,100℃ |
Flexural Modulus | *** Mpa | ISO 178 | Dry,23℃ |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | Conditioned |
- | *** Mpa | ASTM D790 | Dry |
- | *** Mpa | ISO 178 | Dry,100℃ |
- | *** Mpa | ISO 178 | Dry,23℃ |
Shear Strength | *** Mpa | ASTM D 732 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
Izod Notched Impact Strengh | |||
-40℃ (-40℉) | *** J/m | ASTM D256 | Dry |
23℃ (73℉) | *** J/m | ASTM D256 | Conditioned |
23℃ (73℉) | *** J/m | ASTM D256 | Dry |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | Dry |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1U | Dry |
Instrumented Impact Energy | |||
23℃ (73℉)peak | *** J | ASTM D3763 | Dry |
23℃ (73℉)Total Energy | *** J | ASTM D3763 | Dry |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM E831 | 0 to 100℃ |
Flow | *** E-6 cm/cm/℃ | ASTM E831 | 100 to 200℃ |
Across Flow | *** E-6 cm/cm/℃ | ASTM E831 | 0 to 100℃ |
Across Flow | *** E-6 cm/cm/℃ | ASTM E831 | 100 to 200℃ |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | Dry |
Melt Temperature(Tm) | *** °C | ASTM D 570 | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
