Amodel® AT-1002 HS is a neat, toughened, heat stabilized polyphthalamide (PPA) resin that offers superior retention of properties after humid thermal aging; high impact at low temperature and better mechanical properties than many unreinforced thermoplastic polyester and nylon resins.
This material was specifically designed for automotive electrical/electronic applications such as connectors, sockets and sensors.
Natural: AT-1002 HS NT
| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactHigh Impact at Low TemperaturGood ToughnessHeat StabilizedLow WarpageChemical Resistance | |||
| Additive | Impact ModifierHeat StabilizerRelease AgentLubricant | |||
| Appearance | Natural Color | |||
| Processing | Injection | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Dry |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | Dry |
Across Flow | *** % | ASTM D955 | Dry |
Water Absorption | *** % | ASTM D570 | 24 hr |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | Conditioned |
Tensile Modulus | *** Mpa | ASTM D638 | Dry |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,100℃ |
Tensile Modulus | *** Mpa | ISO 527-2 | Dry,23℃ |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | Dry,100℃ |
Yield | *** Mpa | ISO 527-2 | Dry,23℃ |
Break | *** Mpa | ISO 527-2 | Dry,23℃ |
- | *** Mpa | ASTM D 638 | Conditioned |
- | *** Mpa | ASTM D 638 | Dry |
Tensile Elongation | |||
Yield | *** % | ISO 527-2 | Dry,100℃ |
Yield | *** % | ISO 527-2 | Dry,23℃ |
Break | *** % | ASTM D638 | Conditioned |
Break | *** % | ASTM D638 | Dry |
Break | *** % | ISO 527-2 | Dry,23℃ |
Flexural Modulus | *** Mpa | ASTM D790 | Conditioned |
Flexural Modulus | *** Mpa | ASTM D790 | Dry |
Flexural Modulus | *** Mpa | ISO 178 | Dry,100℃ |
Flexural Modulus | *** Mpa | ISO 178 | Dry,23℃ |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | Conditioned |
- | *** Mpa | ASTM D790 | Dry |
- | *** Mpa | ISO 178 | Dry,100℃ |
- | *** Mpa | ISO 178 | Dry,23℃ |
Puncture | |||
Force | *** N | ASTM D 3763 | Conditioned |
Force | *** N | ASTM D 3763 | Dry |
Shear Strength | *** Mpa | ASTM D 732 | Conditioned |
Shear Strength | *** Mpa | ASTM D 732 | Dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | Dry |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | Dry |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | Dry |
- | *** J/m | ASTM D 256 | Conditioned |
- | *** J/m | ASTM D 256 | Dry |
Izod Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1U | Dry |
Instrumented Impact Energy | |||
23℃ (73℉)Total Energy | *** J | ASTM D3763 | Conditioned |
23℃ (73℉)Total Energy | *** J | ASTM D3763 | Dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-2/A | Unannealed |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | ASTM E831 | 0 to 100℃ |
Flow | *** E-6 cm/cm/℃ | ASTM E831 | 100 to 200℃ |
Across Flow | *** E-6 cm/cm/℃ | ASTM E831 | 0 to 100℃ |
Across Flow | *** E-6 cm/cm/℃ | ASTM E831 | 100 to 200℃ |
Melt Temperature(Tm) | *** °C | ISO 11357-3 | Dry |
Melt Temperature(Tm) | *** °C | ASTM D 570 | Dry |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | Dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | Conditioned |
Volume Resistivity | *** Ohm-cm | ASTM D257 | Dry |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | Conditioned |
60 Hz | *** - | ASTM D 150 | Dry |
1MHz | *** - | ASTM D 150 | Conditioned |
1MHz | *** - | ASTM D 150 | Dry |
Dissipation Factor | |||
60 Hz | *** E-4 | ASTM D 150 | Conditioned |
60 Hz | *** E-4 | ASTM D 150 | Dry |
1MHz | *** E-4 | ASTM D150 | Conditioned |
1MHz | *** E-4 | ASTM D150 | Dry |
Comparative Tracking Index (CTI) | |||
- | *** V | UL 746 | Conditioned |
- | *** V | UL 746 | Dry |
Dielectric Strength | *** kV/mm | ASTM D149 | Conditioned |
Dielectric Strength | *** kV/mm | ASTM D149 | Dry |
High Voltage Arc Tracking Rate(HVTR) | *** mm/min | UL 746A | Conditioned |
High Voltage Arc Tracking Rate(HVTR) | *** mm/min | UL 746A | Dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
