Acudel® 22000 is a modified polyphenylsulfone. It is a high-heat, high-performance resin formulation exhibiting very good hydrolytic stability, excellent resistance to acids and bases and good resistance to stress cracking under a broad range of chemical environments. In addition, Acudel® 22000 resin exhibits robust toughness and improved notch resistance compared to both Udel® polysulfone and Veradel® polyethersulfone, although slightly lower than that of neat Radel® polyphenylsulfone. In general, the performance profile of Acudel® 22000 resin falls between polysulfone and polyphenylsulfone.
In addition to its high mechanical and thermal performance attributes, Acudel® 22000 resin also offers very good electrical properties over a broad temperature range as well as inherent flame retardancy.
Natural: Acudel® 22000 NT15
Black: Acudel® 22000 BK937
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Good ToughnessHeat ResistanceHeat StabilizedFlame RetardantESCRChemical ResistanceHydrolysis ResistanceAcid ResistancAlkali resistance | |||
| Appearance | Natural ColorBlack | |||
| Processing | Injection | |||
| Compliance | NSFRoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
380℃/2.16 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | |
Water Absorption | *** % | ASTM D570 | 24 hr |
Water Absorption | *** % | ASTM D570 | 30 days |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ASTM D638 | |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | |
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
Yield | *** Mpa | ASTM D790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | |
Tensile Impact | *** kJ/m² | ASTM D 1822 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Annealed, 3.18 mm |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D150 | |
Dielectric Strength | *** kV/mm | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
