| Original Document | Technical Datasheet-ASTM(English) Technical Datasheet-ISO(English) | |||
| Features | High Stiffness/RigidityGood optical propertiesGood Paintablility | |||
| Appearance | Clear/Transparent | |||
| Processing | Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Puncture | |||
Energy | *** in-lb | ASTM D 3763 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °F | ASTM D1525 | B/1 ( 120 °C/h, 10N) |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | |
Gloss | *** % | ASTM D 2457 | mold temperature 100°F |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** psi | ASTM D 882 | MD |
Yield | *** psi | ASTM D 882 | TD |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD |
Break | *** % | ASTM D 882 | TD |
Elmondorf Tear | *** g | - | MD |
Elmondorf Tear | *** g | - | TD |
Secant Modulus | *** psi | ASTM D 882 | 1% MD |
Secant Modulus | *** psi | ASTM D 882 | 1% TD |
Dart Drop Impact | *** g | ASTM D 1709 | 66 mm |
Water Vapor Transmission Rate | *** g/100in²/day | ASTM F 1249 | 23 °C/0% to 85% RH gradient |
Oxygen permeability | *** cc/100in²/day | ASTM D 3985 | 23 °C/0% RH |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
