| Original Document | Technical Datasheet(English) | |||
| Features | Refrigerant ResistantHigh melt strength | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** - | ASTM D792 | |
Mold Shrinkage | |||
- | ***~*** in/in | ASTM D955 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | |
Tensile Strength | |||
Yield | *** psi | ASTM D638 | 23 °C |
Break | *** psi | ASTM D638 | 23 °C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** psi | ASTM D790 | 23 °C |
Flexural Strength | |||
5% strain | *** psi | ASTM D 790 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
-18℃ (0℉) | *** ft·lb/in | ASTM D 256 | |
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
Instrumented Impact Energy | |||
23℃ (73℉)peak | *** in-lbs | ASTM D3763 | |
23℃ (73℉)Total Energy | *** in-lbs | ASTM D3763 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | Annealed |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Gloss | *** % | ASTM D 523 | 60 ° |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
