DESCRIPTION Terluran® GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio.
FEATURES
- Excellent colorability
- High flowability
- Good impact resistance
- Good heat distortion resistance
- High quality surface finish and gloss
- Great mechanical strength and rigidity
APPLICATIONS
- Injection molding
- Thin wall components for telecommunications
- Household and sanitary appliances
- Toys Automotive components
- Electroplating
| Original Document | Technical Datasheet-ISO(English) Technical Datasheet-ASTM(English) | |||
| Features | Good Impact ResistanceHeat ResistanceGood SurfaceHigh GlossGood ColoringMetal PlatingHigh Flow | |||
| Applications | ToysHousehold ItemsThin wall injection moldingAutomotive PartsSanitary WareTelecommunication | |||
| Processing | Injection | |||
| Diagrams | Viscosity-shear rateShearstress-shear rateDynamic Shear modulus-temperatureStress-strainSecant modulus-strainSpecific volume-temperature (pvT)Tensile modulus-temperature | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** kg/m³ | ISO 1183 | |
Density/Specific Gravity | *** kg/m³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
220°C/10.0 kg | *** cm³/10 min | ISO 1133 | |
230℃/3.8 kg | *** cm³/10 min | ASTM D 1238 | |
Melt Mass Flow Rate(MFR) | |||
200 ℃/5 Kg | *** g/10 min | ASTM D 1238 | |
220℃/10 kg | *** g/10 min | ASTM D 1238 | |
Mold Shrinkage | |||
- | ***~*** in/in | ASTM D955 | |
- | ***~*** % | ISO 294-4 | |
Water Absorption | *** % | ASTM D570 | Saturated at 23 °C |
Water Absorption | *** % | ISO 62 | Saturated at 23 °C |
Moisture /Humidity Absorption | *** % | ISO 62 | Equilibrium 23 °C/50% RH |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** kg/cm² | ASTM D638 | |
Tensile Modulus | *** kg/cm² | ISO 527 | |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | 23 °C |
Yield | *** kg/cm² | ISO 527 | |
Tensile Elongation | |||
Yield | *** % | ISO 527 | |
Nominal Tensile Strain at Break | *** % | ISO 527-1/-2 | |
Nominal Tensile Strain at Break | *** % | ISO 527 | |
- | *** % | ASTM D 638 | |
Flexural Modulus | *** kg/cm² | ASTM D790 | 23 °C |
Flexural Strength | |||
- | *** kg/cm² | ASTM D790 | 23 °C |
- | *** kg/cm² | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** Kg·cm/cm² | ISO 179/1eA | |
23℃ (73℉) | *** Kg·cm/cm² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** Kg·cm/cm² | ISO 179/1eU | |
23℃ (73℉) | *** Kg·cm/cm² | ISO 179/1eU | |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** Kg·cm/cm | ASTM D256 | |
-30℃ (-22℉) | *** Kg·cm/cm² | ISO 180/A | |
-18℃ (0℉) | *** Kg·cm/cm | ASTM D 256 | |
23℃ (73℉) | *** Kg·cm/cm | ASTM D256 | |
23℃ (73℉) | *** Kg·cm/cm² | ISO 180/A | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ASTM D785 | |
Ball Indentation Hardness | *** kg/cm² | ISO 2039-1 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Annealed |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | annealed 4 h/80 °C |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Annealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | annealed 4 h/80 °C |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | VST/A/50 (10N, 50 °C/h) |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | VST/A/50 (10N, 50 °C/h) |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | VST/B/50 (50N, 50 °C/h) |
Coefficient of Linear Thermal Expansion | |||
- | ***~*** E-6/°C | ISO 11359 | |
Thermal Conductivity | *** W/m-°C | DIN 52612-1 | |
Processing Temperature | ***~*** °C | - | |
Mould temperature | ***~*** °C | - | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | > *** Ohm-cm | ASTM D257 | |
Volume Resistivity | > *** Ohm-cm | IEC 60093 | . |
Surface Resistivity | > *** Ohm-cm | IEC 60093 | |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | 0,0394 in |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Yellowness Index | *** - | DIN 6167 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
