| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ISO 1183 | 23℃ |
Density/Specific Gravity |
*** g/cm³
| ASTM D792 | 23℃ |
Melt Volume Flow Rate(MVR) | | | |
200°C/5.0 kg |
*** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | | | |
200 ℃/5 Kg |
*** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | | | |
Yield |
*** kg/cm² | ASTM D638 | 23℃，1/8” Sample |
Yield |
*** Mpa | ISO 527 | 23℃，1/8” Sample |
Tensile Elongation | | | |
Break |
*** % | ASTM D638 | 23℃，1/8” Sample |
Break |
*** % | ISO 527 | 23℃，1/8” Sample |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | | | |
23℃ (73℉) |
*** kg·cm/cm | ASTM D256 | A method,notched 1/4”×1/2”×5/2” |
23℃ (73℉) |
*** kJ/m² | ISO 180/A | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | Unannealed,1/2in |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ISO 75/A | Unannealed,1/2in |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | 1kg load,3mm Thick(120℃/hr) |
Vicat Softening Temperature(VST) |
*** °C
| ISO 306 | 1kg load,3mm Thick(50℃/hr) |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
HB |
*** mm | UL94 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze |
*** %
| ASTM D1003 | 2.8mm thick |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Reidual Monomer |
*** ppm
| - | |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
