AjiENG.com
Sign in | Register

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.
Tel: +86 532 86871530
Email: info@ajieng.com

TAITALAC® 1400Z

SAN(AS)

TTC (Taita Chemical)

Product Description
DESCRIPTION: High Flow、General Injection N: Contain Blue-Tin Z: Exterior Lubricant APPLICATION: Daily commodities, Lamp covers, Pen tube, Cup with cover, Cosmetic cases, Family hardware transparent products, Fruit and vegetable boxes in refrigerato
General
Original Document
Technical Datasheet(English)
Features
High Flow
Additive
Lubricant
Specifications
Physical Value/Unit(Sign in to View) Test Standard Test Condition

Density/Specific Gravity

 *** g/cm³ ASTM D792

Melt Mass Flow Rate(MFR)

200 ℃/5 Kg

*** g/10 min ASTM D 1238

220℃/10 kg

*** g/10 min ASTM D 1238

Mold Shrinkage

-

*** % ASTM D955
max.
Mechanical Value/Unit(Sign in to View) Test Standard Test Condition

Tensile Strength

Yield

*** kg/cm² ASTM D638
23℃, 1/8 in, 5 mm/min

Break

*** kg/cm² ASTM D638
23℃, 1/8 in, 5 mm/min

Tensile Elongation

Break

*** % ASTM D638
23℃, 1/8 in, 5 mm/min

Flexural Modulus

 *** kg/cm² ASTM D790
23℃, 2.8 mm/min

Flexural Strength

Yield

*** kg/cm² ASTM D790
23℃, 2.8 mm/min
Impact Value/Unit(Sign in to View) Test Standard Test Condition

Izod Notched Impact Strengh

23℃ (73℉)

*** kg·cm/cm ASTM D256
1/4 in

23℃ (73℉)

*** kg·cm/cm ASTM D256
1/8 in
Hardness Value/Unit(Sign in to View) Test Standard Test Condition

Rockwell M

 *** M ASTM D 785
23℃
Thermal Value/Unit(Sign in to View) Test Standard Test Condition

Heat Deflection Temperature(HDT)

1.8 Mpa (264 psi)（18.6kg/cm²）

*** °C ASTM D648
Unannealed, 1/2 in

Vicat Softening Temperature(VST)

 *** °C ASTM D1525
1/8 in , 1 kg load
Flammability Value/Unit(Sign in to View) Test Standard Test Condition

Flame Rating

HB

*** mm UL94

The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.