| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Density/Specific Gravity |
*** g/cm³
| ASTM D792 | |
Melt Mass Flow Rate(MFR) | | | |
200 ℃/5 Kg |
*** g/10 min | ASTM D 1238 | |
220℃/10 kg |
*** g/10 min | ASTM D 1238 | |
Mold Shrinkage | | | |
- |
*** % | ASTM D955 | max. |
Water Absorption |
*** %
| ASTM D570 | max. |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | | | |
Yield |
*** kg/cm² | ASTM D638 | 23℃, 1/8 in, 5 mm/min |
Break |
*** kg/cm² | ASTM D638 | 23℃, 1/8 in, 5 mm/min |
Tensile Elongation | | | |
Break |
*** % | ASTM D638 | 23℃, 1/8 in, 5 mm/min |
Flexural Modulus |
*** kg/cm²
| ASTM D790 | 23℃, 2.8 mm/min |
Flexural Strength | | | |
Yield |
*** kg/cm² | ASTM D790 | 23℃, 2.8 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | | | |
23℃ (73℉) |
*** kg·cm/cm | ASTM D256 | 1/4 in |
23℃ (73℉) |
*** kg·cm/cm | ASTM D256 | 1/8 in |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R |
*** R
| ASTM D785 | 23℃ |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | | | |
1.8 Mpa (264 psi)（18.6kg/cm²） |
*** °C | ASTM D648 | Unannealed, 1/2 in |
Vicat Softening Temperature(VST) |
*** °C
| ASTM D1525 | 1/8 in , 1 kg load |
Relative Temperature Index(RTI), Imp | | | |
1.5/1.6 mm |
*** °C | UL 746B | 0.062 in above |
Relative Temperature Index(RTI), Elec | | | |
1.5/1.6 mm |
*** °C | UL 746B | 0.062 in above |
Relative Temperature Index(RTI), Str | | | |
1.5/1.6 mm |
*** °C | UL 746B | 0.062 in above |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | | | |
HB |
*** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
High Voltage Arc Tracking Rate(HVTR) |
mm/min
| UL 746A | 0.062 in above |
Hot Wire Ignition(HWI) |
*** sec
| UL 746A | 0.062 in above |
High Ampere Arc Ignition(HAI) |
*** arcs
| UL 746A | 0.062 in above |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
