Glass fiber-reinforced flame retardant PBT/ABS resin (GF20%, UL94 V-0) Standard
| Original Document | Technical Datasheet(English) | |||
| Features | Flame RetardantFilled & ReinforcedStandard Grade | |||
| Reinforced | 20% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Mold Shrinkage | |||
- | ***~*** % | ASTM D955 | |
Water Absorption | *** % | ISO 62 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | 6.4mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | 6.4mm |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | 6.4mm |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ISO 11359 | |
Across Flow | *** E-6/°C | ISO 11359 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
5VA | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Comparative Tracking Index (CTI) | |||
- | *** PLC | UL 746A | 3.0mm |
- | *** V | IEC 112 | 3.0mm |
Dielectric Strength | *** kV/mm | ASTM D149 | 1.5mm |
Arc Resistance | *** PLC | ASTM D495 | 3.0mm |
Arc Resistance | *** sec | ASTM D495 | 3.0mm |
High Voltage Arc Tracking Rate(HVTR) | *** PLC | UL 746A | 3.0mm |
High Voltage Arc Tracking Rate(HVTR) | *** mm/min | UL 746A | 3.0mm |
Hot Wire Ignition(HWI) | *** PLC | UL 746A | 1.5mm |
Hot Wire Ignition(HWI) | *** sec | UL 746A | 1.5mm |
High Ampere Arc Ignition(HAI) | *** PLC | UL 746A | 1.5mm |
High Ampere Arc Ignition(HAI) | *** arcs | UL 746A | 1.5mm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
