UBE NYLON 1015 UC2 is special modified, heat stabilized Polyamide 6. The material is a so called Nylon Clay Hybrid. It contents exfoliated, by polymerization process incorporated silicate platelets. This material has following features: • Outstanding mould-ability • Perfect surface finish • Extraordinary welding performance (vibration-, injection- and laser-welding) • Excellent mechanical properties with respect to low density • Superior permeation properties • Extreme low brittleness
| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessGood SurfaceEasy processingGood WeldFilled & Reinforced | |||
| Appearance | Natural Color | |||
| Processing | Injection | |||
| Reinforced | 2% Silicate | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | |
Specific modulus | *** Mpa | Internal | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Melt Temperature(Tm) | *** °C | ASTM D3418 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Surface Resistivity | *** Ohm | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
