| Original Document | Technical Datasheet(English) | |||
| Features | High Flow | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23℃, dry |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | 80×80×1mmt, dry |
Flow | ***~*** % | Internal | 80×80×3mmt, dry |
Water Absorption | *** % | ISO 62 | 23℃ in water |
Water Absorption | *** % | ISO 62 | 24hrs. in 23℃ water |
Abrasion resistance | *** mg/1000cy | ISO 9352 | dry |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527-1/-2 | -40℃, 2.5%water |
- | *** Mpa | ISO 527-1/-2 | -40℃, dry |
- | *** Mpa | ISO 527-1/-2 | 23℃, 2.5%water |
- | *** Mpa | ISO 527-1/-2 | 23℃, dry |
- | *** Mpa | ISO 527-1/-2 | 80℃, 2.5%water |
- | *** Mpa | ISO 527-1/-2 | 80℃, dry |
Tensile Elongation | |||
Yield | *** % | ISO 527-1/-2 | 23℃, dry |
Break | *** % | ISO 527-1/-2 | 23℃, 2.5%water |
Break | *** % | ISO 527-1/-2 | 23℃, dry |
Flexural Modulus | *** Mpa | ISO 178 | 80℃, dry |
Flexural Modulus | *** Mpa | ISO 178 | -40℃, 2.5%water |
Flexural Modulus | *** Mpa | ISO 178 | -40℃, dry |
Flexural Modulus | *** Mpa | ISO 178 | 23℃, 2.5%water |
Flexural Modulus | *** Mpa | ISO 178 | 23℃, dry |
Flexural Modulus | *** Mpa | ISO 178 | 80℃, 2.5%water |
Flexural Strength | |||
- | *** Mpa | ISO 178 | -40℃, 2.5%water |
- | *** Mpa | ISO 178 | -40℃, dry |
- | *** Mpa | ISO 178 | 23℃, 2.5%water |
- | *** Mpa | ISO 178 | 23℃, dry |
- | *** Mpa | ISO 178 | 80℃, 2.5%water |
- | *** Mpa | ISO 178 | 80℃, dry |
Coefficient of Friction | ***~*** - | Internal | Without lu brication, Vs metal |
Shear Strength | *** Mpa | ASTM D 732 | 23℃, 2.5%water |
Shear Strength | *** Mpa | ASTM D 732 | 23℃, dry |
Compressive Strength | *** Mpa | ISO 604 | 23℃, dry |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179 | dry |
23℃ (73℉) | *** kJ/m² | ISO 179 | 2.5%water |
23℃ (73℉) | *** kJ/m² | ISO 179 | dry |
Charpy Unnotched Impact Strengh | |||
-40℃ (-40℉) | *** kJ/m² | ISO 179 | dry |
23℃ (73℉) | *** kJ/m² | ISO 179 | dry |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell R | *** R | ISO 2039-2 | 23℃, 2.5%water |
Rockwell R | *** R | ISO 2039-2 | 23℃, dry |
Rockwell R | *** R | ISO 2039-2 | 80℃, dry |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-1/-2 | dry |
Specific Heat | *** J/g-°C | - | dry |
Coefficient of Linear Thermal Expansion | |||
- | ***~*** E-6/°C | ISO 11359-2 | dry |
Melt Temperature(Tm) | *** °C | Internal | dry |
Thermal Conductivity | *** W/m-°C | - | dry |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-2 | *** mm | UL94 | 2.5%water |
V-2 | *** mm | UL94 | dry |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | ***~*** Ohm-m | IEC 60093 | 2.5%water |
Volume Resistivity | ***~*** Ohm-m | IEC 60093 | dry |
Dielectric Constant(Permittivity) | |||
50 Hz | *** - | IEC 60250 | 2.5%water |
50 Hz | *** - | IEC 60250 | 23℃、60%RH, dry |
1 kHz | *** - | IEC 60250 | 2.5%water |
1 kHz | *** - | IEC 60250 | 23℃、60%RH, dry |
1MHz | *** - | IEC 60250 | 2.5%water |
1MHz | *** - | IEC 60250 | 23℃、60%RH, dry |
Dissipation Factor | |||
50 Hz | *** E-4 | IEC 60250 | 2.5%water |
50 Hz | *** E-4 | IEC 60250 | 23℃、60%RH, dry |
1 kHz | *** E-4 | IEC 60250 | 2.5%water |
1 kHz | *** E-4 | IEC 60250 | 23℃、60%RH, dry |
1MHz | *** E-4 | IEC 60250 | 2.5%water |
1MHz | *** E-4 | IEC 60250 | 23℃、60%RH, dry |
Dielectric Strength | *** kV/mm | IEC 60243-1 | dry |
Arc Resistance | *** sec | UL 746A | Tungsten Electrode, dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
