AjiENG.com
Sign in | Register

Aji New Material (Qingdao) Co.,LTD

No.47 Huadingshan Road, Qingdao City, Shandong Province, China.
Tel: +86 532 86871530
Email: info@ajieng.com

DENKA® TX-100S

MMS

DENKA

Product Description
"TX Polymer" (methyl methacrylate styrene), MS resins as an alternative to acrylic resins, with low density, low moisture absorption, and good moldability, TX" is used for flat display substrates, optical components, and miscellaneous goo
General
Original Document
Technical Datasheet(English)
Appearance
Clear/Transparent
Specifications
Physical Value/Unit(Sign in to View) Test Standard Test Condition

Density/Specific Gravity

 *** g/cm³ ISO 1183

Melt Mass Flow Rate(MFR)

200 ℃/5 Kg

*** g/10 min ISO 1133

Mold Shrinkage

-

*** % Internal
2mmt

Water Absorption

 *** % ASTM D570
24 Hour Equilibrium
Mechanical Value/Unit(Sign in to View) Test Standard Test Condition

Tensile Strength

Break

*** Mpa ISO 527-1/-2
5mm/min

Flexural Modulus

 *** Mpa ISO 178
2mm/min

Flexural Strength

-

*** Mpa ISO 178
2mm/min
Impact Value/Unit(Sign in to View) Test Standard Test Condition

Charpy Notched Impact Strengh

23℃ (73℉)

*** kJ/m² ISO 179
Hardness Value/Unit(Sign in to View) Test Standard Test Condition

Rockwell M

 *** M ISO 2039-2
Thermal Value/Unit(Sign in to View) Test Standard Test Condition

Heat Deflection Temperature(HDT)

1.8 Mpa (264 psi)（18.6kg/cm²）

*** °C ISO 75-1/-2
Flatwise

Vicat Softening Temperature(VST)

 *** °C ISO 306
50N
Flammability Value/Unit(Sign in to View) Test Standard Test Condition

Flame Rating

HB

*** mm UL94
Optical Value/Unit(Sign in to View) Test Standard Test Condition

Light Transmission

 *** % ISO 13468-1
2mmt

Haze

 *** % ISO 14782
2mmt

Refractive Index

*** - ASTM D542
Na-D ray

The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.