Features: High dimensional stability High melting point High rigidity Minimum water absorption Good chemical and heat resistance Flame retardant Applications: Electrical and electronic parts including: connectors, jacks, switches, and power supp
| Original Document | Technical Datasheet(English) | |||
| Features | High Stiffness/RigidityHeat ResistanceFlame RetardantDimensional StabilityChemical ResistanceFilled & Reinforced | |||
| Reinforced | 30% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Mold Shrinkage | |||
Flow | *** % | ASTM D955 | 2mm |
Across Flow | *** % | ASTM D955 | 2mm |
Water Absorption | *** % | ASTM D570 | 24 hr, 100°C, 2mm |
Water Absorption | *** % | ASTM D570 | 24 hr, 23°C, 2mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | dry |
- | *** Mpa | ASTM D 638 | moist |
Tensile Elongation | |||
- | *** % | ASTM D 638 | dry |
- | *** % | ASTM D 638 | moist |
Flexural Modulus | *** Mpa | ASTM D790 | dry |
Flexural Modulus | *** Mpa | ASTM D790 | moist |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | dry |
- | *** Mpa | ASTM D790 | moist |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | dry |
23℃ (73℉) | *** J/m | ASTM D256 | moist |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM D 696 | |
Across Flow | *** E-6/°C | ASTM D 696 | |
Melt Temperature(Tm) | *** °C | Internal | |
Glass Transition Temperature | *** °C | Internal | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | dry |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D 150 | dry |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D150 | dry |
Dielectric Strength | *** kV/mm | ASTM D149 | dry |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
