| Original Document | Technical Datasheet(English) | |||
| Features | Heat ResistanceUV Stabiltiy | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Melt Mass Flow Rate(MFR) | |||
230°C/3.8 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
- | ***~*** % | Internal | |
Water Absorption | *** % | ISO 62 | 24hr |
Spiral Flow | *** mm | MRC | 230℃, Thickness 2mm |
Spiral Flow | *** mm | MRC | 250℃, Thickness 2mm |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A/1 | |
Tensile Strength | |||
- | *** Mpa | ISO 527-2/1A/5 | |
Tensile Elongation | |||
- | *** % | ISO 527-2/1A/5 | |
Flexural Modulus | *** Mpa | ISO 178 | |
Flexural Strength | |||
- | *** Mpa | ISO 178 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ISO 2039 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | |
Vicat Softening Temperature(VST) | *** °C | ISO 306 | B50 |
Specific Heat | *** J/g-°C | JIS K 7123 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | ASTM D 696 | |
Thermal Conductivity | *** W/m-°C | ASTM C 177 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | JIS K 6911 | min. |
Surface Resistivity | *** Ohm | JIS K 6911 | min. |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | JIS K 6911 | |
Dissipation Factor | |||
60 Hz | *** E-4 | JIS K 6911 | |
Dielectric Strength | *** kV/mm | JIS K 6911 | 4kV/sec |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Light Transmission | *** % | ISO 13468 | 3mm |
Haze | *** % | ISO 14782 | 3mm |
Refractive Index | *** - | ASTM D542 | nd |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
| Chinese | English | File Format | Action |
|---|---|---|---|
| 物性表(英文) | Technical Datasheet(English) | Down Load |
| Supplier | Price | Region | Message | Contact |
|---|
| Group | Value |
|---|
