| Original Document | Technical Datasheet(English) | |||
| Features | High ImpactFlame Retardant | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 23℃ |
Mold Shrinkage | |||
- | ***~*** % | Internal | 150*150*2mm |
Outdoor Suitability UL F1/F2 | |||
F1 | *** - | UL 746C | BK |
Water Absorption | *** % | ISO 62 | Immersion for 24 Hrs |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ISO 527 | 23℃, 50%RH |
Tensile Elongation | |||
Nominal Tensile Strain at Break | *** % | ISO 527 | 23℃, 50%RH |
Flexural Modulus | *** Mpa | ISO 178 | 23℃, 50%RH |
Flexural Strength | |||
- | *** Mpa | ISO 178 | 23℃, 50%RH |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | 4mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75-1 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6 mm/mm/℃ | ISO 11359 | -30℃-65℃ |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-0 | *** mm | UL94 | |
5VA | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | IEC 60250 | |
1MHz | *** - | IEC 60250 | |
Dissipation Factor | |||
100Hz | *** E-4 | IEC 60250 | |
1MHz | *** E-4 | IEC 60250 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
