| Original Document | Technical Datasheet(English) | |||
| Features | Good ToughnessFlame RetardantHalogen Free | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | DRY |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | DRY |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | DRY |
Water Absorption | *** % | - | WET |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | DRY |
Tensile Modulus | *** Mpa | ISO 527 | WET |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | DRY |
Break | *** Mpa | ISO 527 | WET |
- | *** Mpa | ASTM D 638 | DRY |
- | *** Mpa | ASTM D 638 | WET |
Tensile Elongation | |||
Break | *** % | ASTM D638 | DRY |
Break | *** % | ASTM D638 | WET |
Break | *** % | ISO 527 | DRY |
Break | *** % | ISO 527 | WET |
Flexural Modulus | *** Mpa | ASTM D790 | DRY |
Flexural Modulus | *** Mpa | ASTM D790 | WET |
Flexural Modulus | *** Mpa | ISO 178 | DRY |
Flexural Modulus | *** Mpa | ISO 178 | WET |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | DRY |
- | *** Mpa | ASTM D790 | WET |
- | *** Mpa | ISO 178 | DRY |
- | *** Mpa | ISO 178 | WET |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | DRY |
23℃ (73℉) | *** kJ/m² | ISO 179 | WET |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | DRY |
23℃ (73℉) | *** J/m | ASTM D256 | WET |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | DRY |
Rockwell M | *** M | ISO 2039 | DRY |
Rockwell R | *** R | ASTM D785 | DRY |
Rockwell R | *** R | ASTM D785 | WET |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | DRY |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | DRY |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | DRY |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ASTM D 696 | DRY |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxygen Index | *** % | ASTM D 2863 | DRY |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
