Features: High Stiffness; High Strength; Pleasing Surface Appearance, Glass Fiber, 33% Uses: Automotive Applications; Fabrics; Industrial Applications; Structural Parts
| Original Document | Technical Datasheet(English) | |||
| Features | High StrengthHigh Stiffness/RigidityGood SurfaceFilled & Reinforced | |||
| Reinforced | 33% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | DRY |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | DRY |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | DRY |
Water Absorption | *** % | - | WET |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | DRY |
Tensile Modulus | *** Mpa | ISO 527 | WET |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | DRY |
Break | *** Mpa | ISO 527 | WET |
- | *** Mpa | ASTM D 638 | DRY |
- | *** Mpa | ASTM D 638 | WET |
Tensile Elongation | |||
Break | *** % | ASTM D638 | DRY |
Break | *** % | ASTM D638 | WET |
Break | *** % | ISO 527 | DRY |
Break | *** % | ISO 527 | WET |
Flexural Modulus | *** Mpa | ASTM D790 | DRY |
Flexural Modulus | *** Mpa | ASTM D790 | WET |
Flexural Modulus | *** Mpa | ISO 178 | DRY |
Flexural Modulus | *** Mpa | ISO 178 | WET |
Flexural Strength | |||
- | *** Mpa | ASTM D790 | DRY |
- | *** Mpa | ASTM D790 | WET |
- | *** Mpa | ISO 178 | DRY |
- | *** Mpa | ISO 178 | WET |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | DRY |
23℃ (73℉) | *** kJ/m² | ISO 179 | WET |
Charpy Unnotched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 179 | DRY |
23℃ (73℉) | *** kJ/m² | ISO 179 | WET |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | DRY |
23℃ (73℉) | *** J/m | ASTM D256 | WET |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | DRY |
Rockwell M | *** M | ASTM D 785 | WET |
Rockwell M | *** M | ISO 2039 | DRY |
Rockwell M | *** M | ISO 2039 | WET |
Rockwell R | *** R | ASTM D785 | DRY |
Rockwell R | *** R | ASTM D785 | WET |
Rockwell R | *** R | ISO 2039 | DRY |
Rockwell R | *** R | ISO 2039 | WET |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | DRY |
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75 | DRY |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | DRY |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75 | DRY |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/K | ASTM D 696 | DRY |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | DRY |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | DRY |
Volume Resistivity | *** Ohm-cm | IEC 60093 | DRY |
Surface Resistivity | *** Ohm | ASTM D257 | DRY |
Surface Resistivity | *** Ohm | IEC 60093 | DRY |
Comparative Tracking Index (CTI) | |||
- | *** V | IEC 60112 | DRY |
Dielectric Strength | *** kV/mm | ASTM D149 | DRY |
Dielectric Strength | *** kV/mm | IEC 60243 | DRY |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
