EXTEM XH2115 resin is a HIGH FLOW, 10% glass fiber reinforced, amorphous Polyimide (PI) resin, with high glass transition temperature (Tg = 265 °C). Features include excellent mechanical, electrical and dimensional properties at low and high temperatures. EXTEM™ XH2115 can withstand SMT soldering temperatures up to 245 °C. The material may offer good chemical resistance for an amorphous material and is inherently flame retardant. This material is RoHS compliant.
| Original Document | Technical Datasheet(English) | |||
| Solutions | Aircraft Interiors | |||
| Availability | AsiaEuropeNorth AmericaMiddle EastLatin AmericaAfricaAustralia and New ZealandSouth & Central America | |||
| Features | Heat ResistanceFlame RetardantDimensional StabilityLow WarpageLow ShrinkageCreep ResistantEasy processingMetal PlatingLow Smoke DensityNon(Low)ToxicNo PFASChemical ResistanceHigh FlowFilled & Reinforced | |||
| Applications | Connectors | |||
| Markets | Industrial ApplicationsHealthcareAutomotiveElectrical / Electronics | |||
| Processing | InjectionExtrusionCompression Moulding | |||
| Compliance | RoHS | |||
| Reinforced | 10% Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
360°C/2.16 kg | *** cm³/10 min | ISO 1133 | |
400°C/10 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
367°C/6.6 kg | *** g/10 min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | |||
- | *** Mpa | ISO 527 | 1 mm/min |
- | *** Mpa | ASTM D638 | 5 mm/min |
Tensile Strength | |||
Break | *** Mpa | ISO 527 | 5 mm/min |
Break | *** Mpa | ASTM D638 | Type I, 5 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | Type I, 5 mm/min |
Break | *** % | ISO 527 | 5 mm/min |
Flexural Modulus | |||
- | *** Mpa | ISO 178 | 2 mm/min |
- | *** Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
Flexural Strength | |||
Yield | *** Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
Break | *** Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
- | *** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
Reverse Impact | |||
Izod, notched 23°C | *** J/m | ASTM D 256 | 3.2 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi), Unannealed | *** °C | ASTM D648 | 6.4 mm |
1.8 Mpa (264 psi), Unannealed | *** °C | ASTM D648 | 6.4 mm |
Vicat Softening Temperature(VST) | |||
10N, 50℃/hr (A50/Loading1, RateA) | *** °C | ISO 306 | |
10N, 50℃/hr (A50/Loading1, RateA) | *** °C | ASTM D1525 | |
50N, 120℃/hr (B120/Loading2, RateB) | *** °C | ISO 306 | |
Glass Transition Temperature | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
