LNP ELCRES EXL5389 is a glass fiber reinforced, flame retardant PC/siloxane copolymer resin, offering excellent processability and improved release performance. It is UV stabilized, custom colorable with a UL94 V0 rating at 1.5mm and is based on non-chlorine, non-bromine FR agents. EXL5389 resin offers much improved impact strength and ductility over conventional GF reinforced PC resins. This product is an excellent candidate for a broad range of applications in Mobility, including EVSE and electrical or electronic enclosures among others.
| Original Document | Technical Datasheet(English) | |||
| Solutions | AI Data Center Power Transmission | |||
| Availability | Europe | |||
| Features | Flame RetardantCl- FreeBr- FreeEasy processingChemical ResistanceFilled & Reinforced | |||
| Additive | Flame Retardant | |||
| Applications | Electronics & Electrical ApplicationsElectric Vehicle Supply Equipment(EVSE) | |||
| Processing | Injection | |||
| Reinforced | Glass Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Volume Flow Rate(MVR) | |||
300°C/1.2 kg | *** cm³/10 min | ISO 1133 | |
Melt Mass Flow Rate(MFR) | |||
300℃/1.2 kg | *** g/10min | ASTM D1238 | |
Mold Shrinkage | |||
Flow | ***~*** % | Internal | |
Across Flow | ***~*** % | Internal | |
Outdoor Suitability UL F1/F2 | |||
F1 | *** - | UL 746C | |
Water Absorption | |||
Saturation, 23°C | *** % | ISO 62 | |
In Water, 23°C, 24h | *** % | ASTM D570 | |
Equilibrium, 23°C, 50% RH | *** % | ISO 62 | |
23°C, 50% RH, 24h | *** % | ASTM D570 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | |||
- | *** Mpa | ISO 527 | 1 mm/min |
- | *** Mpa | ASTM D638 | 5 mm/min |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | Type I, 5 mm/min |
Yield | *** Mpa | ISO 527 | 5 mm/min |
Break | *** Mpa | ISO 527 | 5 mm/min |
Break | *** Mpa | ASTM D638 | Type I, 5 mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | Type I, 5 mm/min |
Yield | *** % | ISO 527 | 5 mm/min |
Break | *** % | ASTM D638 | Type I, 5 mm/min |
Break | *** % | ISO 527 | 5 mm/min |
Flexural Modulus | |||
- | *** Mpa | ISO 178 | 2 mm/min |
- | *** Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
Flexural Strength | |||
Yield | *** Mpa | ASTM D790 | 1.3 mm/min, 50 mm span |
Yield | *** Mpa | ISO 178 | 2 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Notched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eA | 80*10*3 |
23℃ (73℉) | *** kJ/m² | ISO 179/1eA | 80*10*3 |
Charpy Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 179/1eU | 80*10*3 |
23℃ (73℉) | *** kJ/m² | ISO 179/1eU | 80*10*33 |
Izod Notched Impact Strengh | |||
-30℃ (-22℉) | *** J/m | ASTM D256 | |
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | 80*10*3 |
-30℃ (-22℉) | *** kJ/m² | ISO 180/1A | 80*10*4 |
0℃ (32℉) | *** J/m | ASTM D256 | |
0℃ (32℉) | *** kJ/m² | ISO 180/1A | 80*10*3 |
0℃ (32℉) | *** kJ/m² | ISO 180/1A | 80*10*4 |
23℃ (73℉) | *** J/m | ASTM D256 | |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | 80*10*3 |
23℃ (73℉) | *** kJ/m² | ISO 180/1A | 80*10*4 |
Izod Unnotched Impact Strengh | |||
-30℃ (-22℉) | *** kJ/m² | ISO 180/1U | 80*10*3 |
-30℃ (-22℉) | *** kJ/m² | ISO 180/1U | 80*10*4 |
-30℃ (-22℉) | *** J/m | ASTM D 4812 | |
23℃ (73℉) | *** J/m | ASTM D4812 | |
23℃ (73℉) | *** kJ/m² | ISO 180/1U | 80*10*3 |
23℃ (73℉) | *** kJ/m² | ISO 180/1U | 80*10*4 |
Instrumented Impact Energy | |||
-30℃ (-22℉)peak | *** J | ISO 6603-2 | |
-30℃ (-22℉)Total Energy | *** J | ASTM D3763 | |
23℃ (73℉)peak | *** J | ISO 6603-2 | |
23℃ (73℉)Total Energy | *** J | ASTM D3763 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75/Bf | 80*10*4 |
0.45 Mpa (66 psi), Unannealed | *** °C | ASTM D648 | 3.2 mm |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ISO 75/Af | 80*10*4 |
1.8 Mpa (264 psi), Unannealed | *** °C | ASTM D648 | 3.2 mm |
Vicat Softening Temperature(VST) | |||
10N(1kg), 50℃/hr | *** °C | ISO 306 | |
10N(1kg), 50℃/hr | *** °C | ASTM D1525 | |
10N(1kg), 120℃/hr | *** °C | ISO 306 | |
10N(1kg), 120℃/hr | *** °C | ASTM D1525 | |
50N(5.1kg), 50℃/hr | *** °C | ISO 306 | |
50N(5.1kg), 50℃/hr | *** °C | ASTM D1525 | |
50N(5.1kg), 120℃/hr | *** °C | ISO 306 | |
50N(5.1kg), 120℃/hr | *** °C | ASTM D1525 | |
Relative Temperature Index(RTI), Imp | |||
- | *** °C | UL 746B | |
Relative Temperature Index(RTI), Elec | |||
- | *** °C | UL 746B | |
Relative Temperature Index(RTI), Str | |||
- | *** °C | UL 746B | |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6/°C | ASTM E831 | -40°C to 40°C |
Flow | *** E-6/°C | ISO 11359-2 | -40°C to 40°C |
Across Flow | *** E-6/°C | ASTM E831 | -40°C to 40°C |
Across Flow | *** E-6/°C | ISO 11359-2 | -40°C to 40°C |
Ball Pressure Test | *** °C | IEC 60695-10-2 | |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
V-1 | ≥ *** mm | UL94 | |
V-0 | *** mm | UL94 | |
5VB | *** mm | UL94 | |
5VA | *** mm | UL94 | |
Glow Wire Flammability Index(GWFI) | |||
1.2mm | *** °C | IEC 60695-2-12 | |
1.5mm | *** °C | IEC 60695-2-12 | |
3mm | *** °C | IEC 60695-2-12 | |
Glow Wire Ignition Test(GWIT) | |||
1.2mm | *** °C | IEC 60695-2-13 | |
1.5mm | *** °C | IEC 60695-2-13 | |
3.0mm | *** °C | IEC 60695-2-13 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Comparative Tracking Index (CTI)-PLC | |||
PLC3 (175-249V) | *** - | UL 746A | |
Hot Wire Ignition(HWI)-PLC | |||
PLC0 (≥ 120s) | ≥ *** mm | UL 746A | |
High Ampere Arc Ignition(HAI)-PLC | |||
PLC0 (≥ 120 times) | ≥ *** mm | UL 746A |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
