Flame Retardant
| Original Document | Technical Datasheet(English) | |||
| Resin ID | PA46 FR(17) | |||
| Features | Heat ResistanceFlame Retardant | |||
| Additive | Flame Retardant | |||
| Processing | Injection | |||
| Diagrams | Dynamic Shear modulus (G storage)-temperatureDynamic Shear modulus-temperature | |||
| Physical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
|---|---|---|---|---|
Density/Specific Gravity | ***/ *** | g/cm³ | ISO 1183 | |
Mold Shrinkage | ||||
Flow | ***/ * | % | ISO 294-4 | |
Across Flow | ***/ * | % | ISO 294-4 | |
Water Absorption | ***/ * | % | ISO 62 | |
Water Absorption | ***/ * | % | ISO 62 | in water at 23°C after 24h |
Moisture /Humidity Absorption | ***/ * | % | ISO 62 | |
| Mechanical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Tensile Modulus | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Strength | ||||
Yield | ***/ *** | Mpa | ISO 527-1/-2 | |
Tensile Elongation | ||||
Yield | ***/ *** | % | ISO 527-1/-2 | |
Nominal Tensile Strain at Break | ***/> *** | % | ISO 527-1/-2 | |
Flexural Modulus | ***/ *** | Mpa | ISO 178 | |
| Impact | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Charpy Notched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eA | |
Charpy Unnotched Impact Strengh | ||||
-30℃ (-22℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 179/1eU | |
Izod Notched Impact Strengh | ||||
-40℃ (-40℉) | ***/ *** | kJ/m² | ISO 180/1A | |
23℃ (73℉) | ***/ *** | kJ/m² | ISO 180/1A | |
| Thermal | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | ||||
1.8 Mpa (264 psi)（18.6kg/cm²） | ***/ * | °C | ISO 75-1/-2 | |
Relative Temperature Index(RTI), Imp | ||||
0.75/0.8mm | ***/ * | °C | UL 746B | |
3.0/3.2 mm | ***/ * | °C | UL 746B | |
Relative Temperature Index(RTI), Elec | ||||
0.75/0.8mm | ***/ * | °C | UL 746B | |
3.0/3.2 mm | ***/ * | °C | UL 746B | |
Relative Temperature Index(RTI), Str | ||||
0.75/0.8mm | ***/ * | °C | UL 746B | |
3.0/3.2 mm | ***/ * | °C | UL 746B | |
Coefficient of Linear Thermal Expansion | ||||
Flow | ***/ * | E-6/°C | ASTM D 696 | |
Across Flow | ***/ * | E-6/°C | ASTM D 696 | |
Melt Temperature(Tm) | ***/ * | °C | ISO 11357-1/-3 | 10°C/min |
Glass Transition Temperature | ***/ * | °C | ISO 11357-1/-2 | 10°C/min |
| Flammability | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Flame Rating | ||||
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | UL94 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
V-0 | ***/ * | mm | IEC 60695-11-10 | |
Glow Wire Flammability Index(GWFI) | ||||
0.75mm | ***/ * | °C | IEC 60695-2-12 | |
3mm | ***/ * | °C | IEC 60695-2-12 | |
Glow Wire Ignition Test(GWIT) | ||||
0.75mm | ***/ * | °C | IEC 60695-2-13 | |
3.0mm | ***/ * | °C | IEC 60695-2-13 | |
| Electrical | Dry/Cond.(Sign in to View) | Unit | Test Standard | Test Condition |
Volume Resistivity | > ***/ *** | Ohm-m | IEC 62631-3-1 | |
Dielectric Strength | ***/ *** | kV/mm | IEC 60243-1 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
